半固态AZ91D镁合金浆料的流变压铸过程数值模拟

白月龙; 徐骏; 张志峰; 毛卫民; 徐宏

试验研究 | 浏览量 : 0 下载量: 284 CSCD: 5

导出
分享
收藏
专辑

半固态AZ91D镁合金浆料的流变压铸过程数值模拟
Numerical Simulation of Filling in Rheo-doecasting Process of the Semi-solid AZ91D Magnesium Alloys
2009年29卷第9期页码：785-788
纸质出版日期： 2009 ，
DOI：

扫描看全文

[1]白月龙,徐骏,张志峰,毛卫民,徐宏.半固态AZ91D镁合金浆料的流变压铸过程数值模拟[J].特种铸造及有色合金,2009,29(09):785-788+777.

Bai Yuelong1, Xu Jun1, Zhang Zhifeng1, et al. Numerical Simulation of Filling in Rheo-doecasting Process of the Semi-solid AZ91D Magnesium Alloys[J]. Special Casting & Nonferrous Alloys, 2009,29(9):785-788.
[1]白月龙,徐骏,张志峰,毛卫民,徐宏.半固态AZ91D镁合金浆料的流变压铸过程数值模拟[J].特种铸造及有色合金,2009,29(09):785-788+777. DOI：

Bai Yuelong1, Xu Jun1, Zhang Zhifeng1, et al. Numerical Simulation of Filling in Rheo-doecasting Process of the Semi-solid AZ91D Magnesium Alloys[J]. Special Casting & Nonferrous Alloys, 2009,29(9):785-788. DOI：

摘要

在半固态AZ91D镁合金浆料表观粘度试验数据拟合的基础上

建立了半固态AZ91D镁合金浆料的表观粘度触变模型

并对AZ91D镁合金浆料在连杆型腔中的充填过程进行了模拟。模拟结果与实际充填结果符合

说明建立的AZ91D镁合金浆料表观粘度触变模型正确可行。模拟优化了连杆压铸件的压铸工艺

合适的压铸工艺参数为:浆料成形温度在590℃以上

内浇道充填速度为2.7m/s

压射比压在40MPa以上。

Abstract

An apparent viscosity model of the semi-solid AZ91D magnesium alloy was established by fitting the testing data

and filling process of semi-solid AZ91D slurry for the connecting rod was simulated. The simulated result was well in agreement with experimental one

exhibiting the availability of the established model. Processing parameters for die casting semi-solid connecting-rod were optimized by simulation. Appropriate processing parameters are as follows:the forming temperature more than 590℃

filling velocity of the ingate more than 2.7m/s and injecting pressure more than 40MPa.