半固态TiC/7075Al基复合材料的制备

由国艳; 刘慧敏; 那音古日巴; 张军; 赵洪生

复合材料 | 浏览量 : 0 下载量: 117 CSCD: 1

导出
分享
收藏
专辑

半固态TiC/7075Al基复合材料的制备
Fabrication of Semi-solid TiC Particles Reinforced 7075 Al Matrix Composites
2009年29卷第5期页码：452-454
纸质出版日期： 2009 ，
DOI：

扫描看全文

[1]由国艳,刘慧敏,那音古日巴,张军,赵洪生.半固态TiC/7075Al基复合材料的制备[J].特种铸造及有色合金,2009,29(05):452-454+389-390.

You Guoyan1, Liu Huimin1, Na Yinguriba2, et al. Fabrication of Semi-solid TiC Particles Reinforced 7075 Al Matrix Composites[J]. Special Casting & Nonferrous Alloys, 2009,29(5):452-454.
[1]由国艳,刘慧敏,那音古日巴,张军,赵洪生.半固态TiC/7075Al基复合材料的制备[J].特种铸造及有色合金,2009,29(05):452-454+389-390. DOI：

You Guoyan1, Liu Huimin1, Na Yinguriba2, et al. Fabrication of Semi-solid TiC Particles Reinforced 7075 Al Matrix Composites[J]. Special Casting & Nonferrous Alloys, 2009,29(5):452-454. DOI：

摘要

采用原位反应液相线铸造技术制备了TiC颗粒增强7075Al基复合材料。通过光学显微镜观察其显微组织

分析工艺参数对TiC颗粒合成过程的影响。结果表明

C和Ti的摩尔比为1.25

Al熔体温度达到950℃

浇注温度为650℃时

制备的复合材料未生成Al3Ti相

并能够获得较理想的等轴晶组织。

Abstract

TiC particle reinforced 7075 Al matrix composites were fabricated by in-situ reactive liquidus method.Microstructure of the composites was observed by optical microscope to understand the effects of processing parameters on the synthesized process of TiC particle.The results reveal that the TiC particle reinforced 7075 aluminum matrix composites with ideal equiaxed structure and absence of Al3Ti phase can be successfully prepared with pouring at 650 ℃ and C via Ti of 1.25（atom weight）and aluminum melt of 950℃.

关键词

原位TiC颗粒原位反应液相线铸造Al基复合材料

Keywords

In-situ TiC ParticleIn-situ Reactive Liquidus CastingAluminum Matrix Composites

references

文章被引用时，请邮件提醒。

提交

微波烧结TiC颗粒增强铝基复合材料