多级固溶处理对7055铝合金组织和性能的影响

曾周亮; 彭北山; 曾苏民; 姜宏阳; 宁爱林

轻有色合金 | 浏览量 : 0 下载量: 433 CSCD: 4

导出
分享
收藏
专辑

多级固溶处理对7055铝合金组织和性能的影响
Effects of Progressive Solution Treatment on Microstructure and Mechanical Properties of 7055 Aluminum Alloy
2009年29卷第7期页码：672-674
纸质出版日期： 2009 ，
DOI：

扫描看全文

[1]曾周亮,彭北山,曾苏民,姜宏阳,宁爱林.多级固溶处理对7055铝合金组织和性能的影响[J].特种铸造及有色合金,2009,29(07):672-674+587.

Zeng Zhouliang1, Peng Beishan1, Zeng Sumin1, et al. Effects of Progressive Solution Treatment on Microstructure and Mechanical Properties of 7055 Aluminum Alloy[J]. Special Casting & Nonferrous Alloys, 2009,29(7):672-674.
[1]曾周亮,彭北山,曾苏民,姜宏阳,宁爱林.多级固溶处理对7055铝合金组织和性能的影响[J].特种铸造及有色合金,2009,29(07):672-674+587. DOI：

Zeng Zhouliang1, Peng Beishan1, Zeng Sumin1, et al. Effects of Progressive Solution Treatment on Microstructure and Mechanical Properties of 7055 Aluminum Alloy[J]. Special Casting & Nonferrous Alloys, 2009,29(7):672-674. DOI：

摘要

研究了多级固溶处理对7055铝合金组织和性能的影响。结果表明

7055铝合金采用多级固溶处理时

其抗拉强度和屈服强度均得到提高

但伸长率略有降低。金相观察发现

采用多级固溶处理处理的合金

其晶粒明显要细小均匀。

Abstract

Effects of progressive solution treatment on microstructure and mechanical properties of 7055 aluminum alloys were investigated. The results reveal that the tensile strength and yield strength of the 7055 aluminum alloy are improved with the slight decrease of elongation after progressive solution treatment. Meanwhile

microstructure of the treated alloy with uniform and fine grain can be observed by OM （optical microscope） and SEM （scanning electron microscope）.