气压顶出充芯连铸制备双金属复合材料试验研究

黎红英; 李莎; 梁贺; 杜玉; 刘增辉; 吴春京

复合材料 | 浏览量 : 0 下载量: 122 CSCD: 1

导出
分享
收藏
专辑

气压顶出充芯连铸制备双金属复合材料试验研究
Preparation of Bimetal Cladding Composites by Air Pressing Push-out Core Filled Continuous Casting
2009年29卷第11期页码：1047-1049
纸质出版日期： 2009 ，
DOI：

扫描看全文

[1]黎红英,李莎,梁贺,杜玉,刘增辉,吴春京.气压顶出充芯连铸制备双金属复合材料试验研究[J].特种铸造及有色合金,2009,29(11):1047-1049+978.

Li Hongying, Li Sha, Liang He, et al. Preparation of Bimetal Cladding Composites by Air Pressing Push-out Core Filled Continuous Casting[J]. Special Casting & Nonferrous Alloys, 2009,29(11):1047-1049.
[1]黎红英,李莎,梁贺,杜玉,刘增辉,吴春京.气压顶出充芯连铸制备双金属复合材料试验研究[J].特种铸造及有色合金,2009,29(11):1047-1049+978. DOI：

Li Hongying, Li Sha, Liang He, et al. Preparation of Bimetal Cladding Composites by Air Pressing Push-out Core Filled Continuous Casting[J]. Special Casting & Nonferrous Alloys, 2009,29(11):1047-1049. DOI：

摘要

采用自制设备

运用气压顶出充芯连铸法

制备出外径为12mm

内径为8mm的铅包锡双金属复合棒坯。对复合棒坯的外观、断面和界面进行了分析

结果表明

复合棒坯连续稳定

表面质量良好

包覆层厚度均匀

界面实现了冶金结合。

Abstract

Pb cladding Sn bimetal composite rods with 8 mm in inner diameter and 12 mm in outer diameter were prepared with self-developed equipment by air-pressing push-out core filled continuous casting.The appearance

fracture morphology and interface of the composite rod were observed by OM（optical microscope）.The results show that continuous stable composite rods exhibit desirable surface quality and uniform cladding thickness as well as metallurgical bonding in interface.