English Version
试验研究 | 浏览量 : 30 下载量: 185 CSCD: 5
  • 导出

  • 分享

  • 收藏

  • 专辑

    • 原位Mg2Si/Al复合材料半固态组织的形成与演变

    • Formation and Evolution of Semi-solid Microstructure of In-situ Mg2Si/Al Composites

    • 秦庆东

      1

      赵宇光

      2

      邱仕麟

      1

      黄海波

      1
    • 2009年29卷第7期 页码:589-592   

      纸质出版日期: 2009

    扫 描 看 全 文

  • 引用

  • [1]秦庆东,赵宇光,邱仕麟,黄海波.原位Mg_2Si/Al复合材料半固态组织的形成与演变[J].特种铸造及有色合金,2009,29(07):589-592+581. DOI:
    Qin Qingdong1, Zhao Yuguang2, Qi Shilin1, et al. Formation and Evolution of Semi-solid Microstructure of In-situ Mg2Si/Al Composites[J]. Special Casting & Nonferrous Alloys, 2009,29(7):589-592. DOI:
  •  
  •  
    论文导航

    摘要

    研究了P对原位Mg2Si/Al复合材料显微组织的影响,利用等温热处理的方法成功地得到了基体与增强体双相球化的半固态球状组织,探讨了球化机理。结果表明,P孕育变质后,铸态组织中Mg2Si增强相由粗大的枝晶转变为细小的块状,经过等温热处理后的半固态组织,增强相分布均匀、尺寸细小,均表现为规则的球形,而α-Al的形貌也变得较为圆整。此外,随着热处理保温时间的增加,Mg2Si尺寸没有明显的变化,相反,α-Al的尺寸却有明显的增加。

    Abstract

    Effects of P on microstructure of in-situ Mg2Si/Al composites were described,and the composites with spherical semi-solid structure where both the matrix and reinforcement are spheroidized can be successfully prepared by the isothermal heat treatment,meanwhile,the spheroidization mechanism is approached. The results show that with P modification,Mg2Si particle in the as-cast microstructure of the composites is evolved from coarse dendrite into fine block structure. Furthermore,reinforcement with fine size and uniformly distribution exhibits regular spherical structure in the isothermal heat treated semi-solid composites,while morphology of α-Al in the composites also becomes spherical structure. In addition,with increasing in holding time,the hardly any change of Mg2Si size is found,however,the noted size change of α-Al phase can be observed.

    关键词

    原位Mg2Si/Al复合材料; 孕育变质; 半固态; 显微组织演变

    Keywords

    In-situ Mg2Si/Al Composites; Inoculation Modification; Semi-solid; Microstructural Evolution

    文章被引用时,请邮件提醒。
    提交

    相关作者

    邱谨 兰州理工大学省部共建有色金属先进加工与再利用国家重点实验室
    曹杨婧 兰州理工大学省部共建有色金属先进加工与再利用国家重点实验室
    罗晓梅 兰州理工大学省部共建有色金属先进加工与再利用国家重点实验室
    周宏伟 兰州理工大学省部共建有色金属先进加工与再利用国家重点实验室;兰州理工大学有色金属合金及加工教育部重点实验室
    曹驰 兰州理工大学省部共建有色金属先进加工与再利用国家重点实验室;兰州理工大学温州泵阀工程研究院
    毕广利 兰州理工大学省部共建有色金属先进加工与再利用国家重点实验室;兰州理工大学有色金属合金及加工教育部重点实验室
    李元东 兰州理工大学省部共建有色金属先进加工与再利用国家重点实验室;兰州理工大学有色金属合金及加工教育部重点实验室
    白月龙 北京科技大学材料科学与工程学院; 北京有色金属研究总院国家有色金属复合材料工程技术研究所

    相关机构

    兰州理工大学省部共建有色金属先进加工与再利用国家重点实验室
    兰州理工大学有色金属合金及加工教育部重点实验室
    兰州理工大学温州泵阀工程研究院
    北京科技大学材料科学与工程学院
    北京有色金属研究总院国家有色金属复合材料工程技术研究所
    0