Yang Yingjun1, Wei Sidong1, Li Zheyu1, et al. Microstructure of Cu-Ti-Zr-Ni Bulk Amorphous Alloy[J]. Special Casting & Nonferrous Alloys, 2009,29(9):845-847.
Yang Yingjun1, Wei Sidong1, Li Zheyu1, et al. Microstructure of Cu-Ti-Zr-Ni Bulk Amorphous Alloy[J]. Special Casting & Nonferrous Alloys, 2009,29(9):845-847.DOI:
Crystallized microstructure of slowly solidified Cu52.5Ti30Zr11.5Ni6 bulk amorphous alloy was analyzed by XRD (X-ray diffraction) and TEM (transmission electron microscope). It is found that there exists Cu-Ti2-Cu10Zr7
Cu3Ti-CuZr
Cu3Ti-Cu10Zr7-CuZr eutectic structure in the alloy system
which shows that the deep eutectic point of the amorphous alloy is composed of many low element eutectic reactions. Moreover
short-rang ordering clusters in the melt with configuration similar to that of Cu10Zr compound may be greatly contributed to the glass forming ability of the tested bulk amorphous alloy.