差压铸造铝合金舱门盖的研制

连付奎; 邢志媛; 陈虹; 侯立群

压力铸造 | 浏览量 : 0 下载量: 147 CSCD: 2

导出
分享
收藏
专辑

差压铸造铝合金舱门盖的研制
Manufacturing of Aluminum Alloy Port Cover by Counter-pressure Casting
2009年29卷第11期页码：1026-1029
纸质出版日期： 2009 ，
DOI：

扫描看全文

[1]连付奎,邢志媛,陈虹,侯立群.差压铸造铝合金舱门盖的研制[J].特种铸造及有色合金,2009,29(11):1026-1029+976-977.

Lian Fukui, Xing Zhiyuan, Chen Hong, et al. Manufacturing of Aluminum Alloy Port Cover by Counter-pressure Casting[J]. Special Casting & Nonferrous Alloys, 2009,29(11):1026-1029.
[1]连付奎,邢志媛,陈虹,侯立群.差压铸造铝合金舱门盖的研制[J].特种铸造及有色合金,2009,29(11):1026-1029+976-977. DOI：

Lian Fukui, Xing Zhiyuan, Chen Hong, et al. Manufacturing of Aluminum Alloy Port Cover by Counter-pressure Casting[J]. Special Casting & Nonferrous Alloys, 2009,29(11):1026-1029. DOI：

摘要

采用差压铸造技术和充型及凝固过程模拟仿真技术

研制了铝合金舱门盖铸件

其模拟仿真结果和试制结果相吻合;采用减压式差压铸造技术

试制的铝合金舱门盖无缩孔和疏松缺陷

力学性能明显改善

抗拉强度达到315～325MPa

伸长率达到4%～6%。

Abstract

Aluminum alloy port cover was manufactured by counter-pressure casting

and filling and solidification were simulated.The results reveal that the simulated results are accordant with the trial product ones.The mechanical properties of the trial-product aluminum alloy port cover with shrinkage porosity（hole） free

which is manufactured by pressure-reduction types counter pressure casting

are greatly improved

where tensile strength and elongation reach 315～325 MPa and 4%～6%

respectively.