ZL109铝合金表面离子镀TiN薄膜及耐磨性

王自荣; 潘应君; 唐望生; 栾成; 邓敏; 温玉磊

轻有色合金 | 浏览量 : 0 下载量: 222 CSCD: 1

导出
分享
收藏
专辑

ZL109铝合金表面离子镀TiN薄膜及耐磨性
TiN Films Deposited by Ion Plating on the Surface of ZL109 Aluminum Alloy and Its Wear-resistance
2010年30卷第2期页码：180-182
纸质出版日期： 2010 ，
DOI：

扫描看全文

[1]王自荣,潘应君,唐望生,栾成,邓敏,温玉磊.ZL109铝合金表面离子镀TiN薄膜及耐磨性[J].特种铸造及有色合金,2010,30(02):180-182+97.

Wang Zirong1, Pan Yingjun1, Tang Wangsheng2, et al. TiN Films Deposited by Ion Plating on the Surface of ZL109 Aluminum Alloy and Its Wear-resistance[J]. Special Casting & Nonferrous Alloys, 2010,30(2):180-182.
[1]王自荣,潘应君,唐望生,栾成,邓敏,温玉磊.ZL109铝合金表面离子镀TiN薄膜及耐磨性[J].特种铸造及有色合金,2010,30(02):180-182+97. DOI：

Wang Zirong1, Pan Yingjun1, Tang Wangsheng2, et al. TiN Films Deposited by Ion Plating on the Surface of ZL109 Aluminum Alloy and Its Wear-resistance[J]. Special Casting & Nonferrous Alloys, 2010,30(2):180-182. DOI：

摘要

采用多弧等离子体辅助物理气相沉积法

在ZL109铝合金表面沉积了TiN薄膜并对其形貌结构及耐磨性进行了研究。结果表明

在温度较低时TiN薄膜在ZL109铝合金表面生长方式为平面生长模式

随着沉积温度的升高及时间的延长

生长方式向岛状生长模式转化;在沉积温度为280℃

时间为1h时

得到的TiN薄膜厚度在2μm以上;ZL109铝合金表面沉积TiN薄膜后耐磨性提高约4倍。

Abstract

The microstructure and wear-resistant properties of TiN films which were deposited by multi-arc ion plating system on the surface of ZL109 aluminum alloy were investigated. The results reveal that the growth pattern of TiN films deposited on the ZL109 aluminum alloy exhibit planar growth mode at low temperature

which is converted into island mode with increasing in deposition temperature and in time. TiN films with 2 μm in thickness can be observed with deposited at 280 ℃ for 1 hours. After the TiN films deposited on the surface of ZL109 aluminum alloy

the wear-resistant properties are increased about four times

compared with those of the samples with deposited-free.