Dmax油底壳压铸浇注系统的设计

葛春东; 王淑清

压力铸造 | 浏览量 : 0 下载量: 118 CSCD: 3

导出
分享
收藏
专辑

Dmax油底壳压铸浇注系统的设计
Design and Optimization of Gating System for Die Casting Dmax Oil Pan Based on the Anycasting Simulation
2010年30卷第5期页码：421-423
纸质出版日期： 2010 ，
DOI：

扫描看全文

[1]葛春东,王淑清.Dmax油底壳压铸浇注系统的设计[J].特种铸造及有色合金,2010,30(05):421-423+386.

Ge Chundong, Wang Shuqing. Design and Optimization of Gating System for Die Casting Dmax Oil Pan Based on the Anycasting Simulation[J]. Special Casting & Nonferrous Alloys, 2010,30(5):421-423.
[1]葛春东,王淑清.Dmax油底壳压铸浇注系统的设计[J].特种铸造及有色合金,2010,30(05):421-423+386. DOI：

Ge Chundong, Wang Shuqing. Design and Optimization of Gating System for Die Casting Dmax Oil Pan Based on the Anycasting Simulation[J]. Special Casting & Nonferrous Alloys, 2010,30(5):421-423. DOI：

摘要

应用Anycasting软件

对Dmax油底壳压铸成形过程进行了模拟。通过观察铝液的填充过程

以及不同浇注方案铸件充型过程的分析和可能产生的铸造缺陷的预测

确定了铝液从铸件两侧同时填充的浇注系统设计方案

经实际生产验证获得了较好的效果。

Abstract

Die casting process for Dmax oil pan was simulated by the Anycasting software.Filling process in different gating systems was visualized to predict potential defect position in the castings by observing liquid aluminum filling.Gating system with liquid aluminum filling from two-sides of castings was designed.The practical production verifies that the gating system has desirable effects.