Mg-RE（Nd,Y）-0.48Zn-0.52Zr合金显微组织及强韧化机理

董丽君; 夏长清; 吴安如; 高为国

实用研究 | 浏览量 : 0 下载量: 151 CSCD: 2

导出
分享
收藏
专辑

Mg-RE（Nd,Y）-0.48Zn-0.52Zr合金显微组织及强韧化机理
Microstructure and Strengthening-toughening Mechanism of Mg-RE（Nd, Y）-0.48Zn-0.52Zr Alloys
2009年29卷第10期页码：901-904
纸质出版日期： 2009 ，
DOI：

扫描看全文

[1]董丽君,夏长清,吴安如,高为国.Mg-RE(Nd,Y)-0.48Zn-0.52Zr合金显微组织及强韧化机理[J].特种铸造及有色合金,2009,29(10):901-904+876-877.

Dong Lijun1, Xia Changqing1, Wu Anru2, et al. Microstructure and Strengthening-toughening Mechanism of Mg-RE（Nd, Y）-0.48Zn-0.52Zr Alloys[J]. Special Casting & Nonferrous Alloys, 2009,29(10):901-904.
[1]董丽君,夏长清,吴安如,高为国.Mg-RE(Nd,Y)-0.48Zn-0.52Zr合金显微组织及强韧化机理[J].特种铸造及有色合金,2009,29(10):901-904+876-877. DOI：

Dong Lijun1, Xia Changqing1, Wu Anru2, et al. Microstructure and Strengthening-toughening Mechanism of Mg-RE（Nd, Y）-0.48Zn-0.52Zr Alloys[J]. Special Casting & Nonferrous Alloys, 2009,29(10):901-904. DOI：

摘要

采用光学显微镜、扫描电镜及X射线衍射等对Mg-RE（Nd

Y）-0.48Zn-0.52Zr合金组织及相组成进行了分析。对2种合金的挤压态试样进行了室温力学性能及高温力学性能试验

并与T5热处理后进行比较。Mg-Nd-0.48Zn-0.52Zr合金在300℃时的抗拉强度为79.00MPa

Mg-Nd-Y-0.48Zn-0.52Zr合金在330℃时的抗拉强度为202.53MPa

试验结果表明

添加Y对提高合金高温抗拉强度有明显的作用。

Abstract

Microstructure and phase constituent of Mg-RE（Nd

Y）-0.48Zn-0.52Zr alloy were analyzed by OM （optical microscope）

SEM （scanning electron microscope） and XRD （X-ray diffraction）. Meanwhile

the mechanical properties at room temperature and at high temperature of two kinds of as-extruded samples were tested

and they were compared with those of extrusion +T5 heat treated ones. The results show that tensile strength of Mg-RE（Nd）-0.48Zn-0.52Zr reaches 79MPa at 300℃ while tensile strength of Mg-RE（Y）-0.48Zn-0.52Zr reaches 202.53MPa at 330℃. The Y element plays the obvious role in improving elevated tensile strength of the alloy.