单管强冷法制坯工艺对A356合金半固态坯料组织的影响

郑志强; 熊新根; 胡佛涛; 徐静; 王官明

半固态加工 | 浏览量 : 0 下载量: 56 CSCD: 2

导出
分享
收藏
专辑

单管强冷法制坯工艺对A356合金半固态坯料组织的影响
Effects of Technological Parameters in Strong Cooling with Single-tube on Microstructure of A356 Alloy Semi-solid Billets
2009年29卷第12期页码：1112-1114
纸质出版日期： 2009 ，
DOI：

扫描看全文

[1]郑志强,熊新根,胡佛涛,徐静,王官明.单管强冷法制坯工艺对A356合金半固态坯料组织的影响[J].特种铸造及有色合金,2009,29(12):1112-1114+1074.

Zheng Zhiqiang, Xiong Xingen, Hu Fotao, et al. Effects of Technological Parameters in Strong Cooling with Single-tube on Microstructure of A356 Alloy Semi-solid Billets[J]. Special Casting & Nonferrous Alloys, 2009,29(12):1112-1114.
[1]郑志强,熊新根,胡佛涛,徐静,王官明.单管强冷法制坯工艺对A356合金半固态坯料组织的影响[J].特种铸造及有色合金,2009,29(12):1112-1114+1074. DOI：

Zheng Zhiqiang, Xiong Xingen, Hu Fotao, et al. Effects of Technological Parameters in Strong Cooling with Single-tube on Microstructure of A356 Alloy Semi-solid Billets[J]. Special Casting & Nonferrous Alloys, 2009,29(12):1112-1114. DOI：

摘要

研究了管式分散强冷技术中单管强冷制坯工艺对A356铝合金坯料组织的影响。结果表明

当冷却水流量为180L/h

浇注温度为640～650℃时

所得坯料的晶粒形状接近于球状

晶粒也较细小

满足半固态成形技术对坯料晶粒组织的要求。

Abstract

Effects of technological parameters in strong cooling with single-tube on microstructure of A356 alloy semi-solid billets were described.The results show that fine grain in prepared billets is approximately spherical structure with pouring at 640

50℃ and cooling at 180L/h

meeting the requirements of semi-solid forming for billets.