定向凝固用陶瓷型壳高温力学性能研究现状

刘孝福; 娄延春; 苏贵桥; 于波

专题论述 | 浏览量 : 0 下载量: 381 CSCD: 10

导出
分享
收藏
专辑

定向凝固用陶瓷型壳高温力学性能研究现状
Survey of Elevated Mechanical Properties of Ceramic Shell Mold in Directional Solidification
2010年30卷第10期页码：913-917
纸质出版日期： 2010 ，
DOI：

扫描看全文

[1]刘孝福,娄延春,苏贵桥,于波.定向凝固用陶瓷型壳高温力学性能研究现状[J].特种铸造及有色合金,2010,30(10):913-917+983.

Liu Xiaofu, Lou Yanchun, Su Guiqiao, et al. Survey of Elevated Mechanical Properties of Ceramic Shell Mold in Directional Solidification[J]. Special Casting & Nonferrous Alloys, 2010,30(10):913-917.
[1]刘孝福,娄延春,苏贵桥,于波.定向凝固用陶瓷型壳高温力学性能研究现状[J].特种铸造及有色合金,2010,30(10):913-917+983. DOI：

Liu Xiaofu, Lou Yanchun, Su Guiqiao, et al. Survey of Elevated Mechanical Properties of Ceramic Shell Mold in Directional Solidification[J]. Special Casting & Nonferrous Alloys, 2010,30(10):913-917. DOI：

摘要

简述了高温合金定向凝固用陶瓷型壳的工况

重点介绍了在浆料中添加矿化剂和粒度小于10μm超细氧化铝粉等提高型壳材料的化学反应活性以促进型壳中莫来石的形成

进而提高陶瓷型壳的高温强度和抗蠕变性能的措施。还有采用非连续纤维和连续纤维强化型壳

提高其强度和抗蠕变性能的方法。并通过提高型壳孔隙率和在面层形成阻挡层的方法提高型壳的抗热震性能。同时

指出了定向凝固用陶瓷型壳存在的一些问题

论述了其发展方向。

Abstract

Application of ceramic shell mold in elevated alloy directional solidification was reviewed

focusing on adding mineralizer and ultrafine alumina powder with the size of less than 10μm to increase chemical reactive activity of ceramic shell mold materials to promote the formation of the mullite

and adopting discontinuous or continuous fiber to strengthen mold shell

to improve the elevated strength and creep resistance of the shell mold.In addition

thermal shocking resistance of ceramic shell mold can be improved by increasing porosity in the ceramic shell mold and forming barrier layer at the layer.Furthermore

some problems in the ceramic shell molds were pointed out.