改良ZL101合金的力学性能

苏广才; 庞祖高; 张修海; 艾香红; 唐汉坤

实用研究 | 浏览量 : 0 下载量: 190 CSCD: 3

导出
分享
收藏
专辑

改良ZL101合金的力学性能
Elevated Mechanical Properties of Modified Al-Si Casting Alloy
2010年30卷第7期页码：608-610
纸质出版日期： 2010 ，
DOI：

扫描看全文

[1]苏广才,庞祖高,张修海,艾香红,唐汉坤.改良ZL101合金的力学性能[J].特种铸造及有色合金,2010,30(07):608-610+582.

Su Guangcai1, Pang Zugao1, Zhang Xiuhai1, et al. Elevated Mechanical Properties of Modified Al-Si Casting Alloy[J]. Special Casting & Nonferrous Alloys, 2010,30(7):608-610.
[1]苏广才,庞祖高,张修海,艾香红,唐汉坤.改良ZL101合金的力学性能[J].特种铸造及有色合金,2010,30(07):608-610+582. DOI：

Su Guangcai1, Pang Zugao1, Zhang Xiuhai1, et al. Elevated Mechanical Properties of Modified Al-Si Casting Alloy[J]. Special Casting & Nonferrous Alloys, 2010,30(7):608-610. DOI：

摘要

以ZL101合金为基础

通过添加Cu、Ni、Mn、V、RE等合金元素

制备了改良ZL101合金

并对其高温力学性能进行了研究。结果表明

改良ZL101合金组织中由于出现了Al2Cu、Al7（FeMnSi）3、Al6Cu3Ni和AlxV3CuRE等新相

因而改善了合金的高温力学性能

提高了其服役温度

且改良合金制备工艺简单

成本低廉。

Abstract

Modified Al-Si casting alloy was prepared by adding alloying elements

such as Cu

and elevated mechanical properties of the alloy were analyzed.It is found that elevated mechanical properties of the alloy are improved as a result of creation of Al2Cu phase

Al7（FeMnSi）3 phase

Al6Cu3Ni and AlxV3CuRE phase in the microstructure

greatly raising the service temperature.In addition

the preparation technology exhibits the features of simple and low cost.