斜滑块分型推件块推件壳体压铸模

王名涌; 田福祥

压力铸造 | 浏览量 : 0 下载量: 47 CSCD: 3

导出
分享
收藏
专辑

斜滑块分型推件块推件壳体压铸模
Shell Die Casting Die with Cavity Parting by Inclined Slides and Push Part by Stripping Plate
2010年30卷第7期页码：649-650
纸质出版日期： 2010 ，
DOI：

扫描看全文

[1]王名涌,田福祥.斜滑块分型推件块推件壳体压铸模[J].特种铸造及有色合金,2010,30(07):649-650+585.

Wang Mingyong1, Tian Fuxiang2. Shell Die Casting Die with Cavity Parting by Inclined Slides and Push Part by Stripping Plate[J]. Special Casting & Nonferrous Alloys, 2010,30(7):649-650.
[1]王名涌,田福祥.斜滑块分型推件块推件壳体压铸模[J].特种铸造及有色合金,2010,30(07):649-650+585. DOI：

Wang Mingyong1, Tian Fuxiang2. Shell Die Casting Die with Cavity Parting by Inclined Slides and Push Part by Stripping Plate[J]. Special Casting & Nonferrous Alloys, 2010,30(7):649-650. DOI：

摘要

针对弯头铸件的需要多个方向侧抽芯和包紧力大的特点

采用纵向4分斜滑块侧抽芯和推件块推件模具结构

解决了侧抽芯和铸件脱模问题。4个斜滑块由销轴与连接板滑动铰接在一起

推件块、连接板和推板固连。脱模时

推杆通过推板和连接板推动4个斜滑块和推件块前移

斜滑块沿斜导轨张开抽芯的同时

推件块将铸件推离动模型芯。模具结构紧凑

工作可靠

操作方便。

Abstract

Aiming at side core-pulling in many directions and stronger wrapping force

side core-pulling by inclined slides along longitudinal and stripping plate mechanism were adopted in the die design to eliminate the problems in side core-pulling and ejecting the castings.Four inclined slides and interlinkage plate were jointed with pins

and stripping plate

interlinkage plate and ejector plate were fixed together.In the ejection

four inclined slides and stripping plate were pushed forward by ejector plate and interlinjage plate powered b ejector pins.The mould exhibits compact in structure and reliable in working and convenient in operation.