高强耐磨铝黄铜（KK5）硬质点的研究

重有色合金 | 浏览量 : 0 下载量: 140 CSCD: 4

扫描看全文

[1]朱权利,张先满,陈家坚,陈维平,汪桂龙,李晨,陈志力.高强耐磨铝黄铜(KK5)硬质点的研究[J].特种铸造及有色合金,2010,30(09):876-877+784.

Zhu Quanli1, Zhang Xianman1, Chen Jiajian1, et al. Hard Spots in High Strength and Wear Resistant Aluminum Brass（KK5）[J]. Special Casting & Nonferrous Alloys, 2010,30(9):876-877.
[1]朱权利,张先满,陈家坚,陈维平,汪桂龙,李晨,陈志力.高强耐磨铝黄铜(KK5)硬质点的研究[J].特种铸造及有色合金,2010,30(09):876-877+784. DOI：

Zhu Quanli1, Zhang Xianman1, Chen Jiajian1, et al. Hard Spots in High Strength and Wear Resistant Aluminum Brass（KK5）[J]. Special Casting & Nonferrous Alloys, 2010,30(9):876-877. DOI：

通过光学金相显微镜、扫描电镜及能谱分析、硬度测定

系统地研究了高强度耐磨铝黄铜合金（KK5）铸件中出现的大块状硬质点

分析了该硬质点产生的根源

并提出了相应的预防措施

经过生产实际验证

取得了良好的效果。

Hard spots in high strength and wear resistant aluminum brass components were investigated systematically by optical microscope

scanning electron microscope and EDS

micro-hardness testing. Origination of the hard spots in the aluminum brass parts was described

and countermeasures were presented.

铝黄铜硬质点高强耐磨

Aluminum BrassHard SpotHigh Strength and Wear Resistance

文章被引用时，请邮件提醒。

提交