超声波作用下半固态A356合金的制备与理论研究

王家宣; 姜丽红; 方敏; 熊洪淼; 罗贻正

半固态加工 | 浏览量 : 0 下载量: 151 CSCD: 4

导出
分享
收藏
专辑

超声波作用下半固态A356合金的制备与理论研究
Preparation and Theoretical Analysis of Semi-solid A356 Aluminum Alloy by Ultrasonic Stirring
2010年30卷第4期页码：323-325
纸质出版日期： 2010 ，
DOI：

扫描看全文

[1]王家宣,姜丽红,方敏,熊洪淼,罗贻正.超声波作用下半固态A356合金的制备与理论研究[J].特种铸造及有色合金,2010,30(04):323-325+287.

Wang Jiaxuan, Jiang Lihong, Fang Min, et al. Preparation and Theoretical Analysis of Semi-solid A356 Aluminum Alloy by Ultrasonic Stirring[J]. Special Casting & Nonferrous Alloys, 2010,30(4):323-325.
[1]王家宣,姜丽红,方敏,熊洪淼,罗贻正.超声波作用下半固态A356合金的制备与理论研究[J].特种铸造及有色合金,2010,30(04):323-325+287. DOI：

Wang Jiaxuan, Jiang Lihong, Fang Min, et al. Preparation and Theoretical Analysis of Semi-solid A356 Aluminum Alloy by Ultrasonic Stirring[J]. Special Casting & Nonferrous Alloys, 2010,30(4):323-325. DOI：

摘要

采用自制的一套超声处理装置

研究了在此装置下施加超声振动对A356合金熔体组织的细化作用。结果表明

在此装置下加载超声功率

对A356合金的组织有细化作用

而且超声功率越大

组织细化效果越明显

另外

施振温度不同

效果也不一样

在选取施振温度分别为640、620、600℃时

施振温度为640℃时

效果最好。

Abstract

We have developed an ultrasonic treatment apparatus to investigate effects of ultrasonic vibration on refinement of grain size in A356 alloy melt. The results reveal that grain size in A356 alloy is obviously refined with applying ultrasonic treatment. With increasing in ultrasonic power

grain becomes finer and finer in the structure of A356 alloy. In addition

ultrasonic temperature has some effects on refinement of grain size. Grain size change was observed with exerting ultrasonic vibration on the A356 alloy melt at 640

620 and 600℃. It is found that desirable grain refinement can be obtained at 640 ℃.