真空压铸用真空阀及真空控制装置的开发

万里; 林海; 刘后尧; 陈国强; 冯佳雄; 吴湛方; 杨林方; 吴树森

压力铸造 | 浏览量 : 0 下载量: 342 CSCD: 8

导出
分享
收藏
专辑

真空压铸用真空阀及真空控制装置的开发
Application and Development of Vacuum Valve and Vacuum Control Equipment for High Vacuum Die Casting
2011年31卷第3期页码：222-225
纸质出版日期： 2011 ，
DOI：

扫描看全文

[1]万里,林海,刘后尧,陈国强,冯佳雄,吴湛方,杨林方,吴树森.真空压铸用真空阀及真空控制装置的开发[J].特种铸造及有色合金,2011,31(03):222-225+190-191.

Wan Li1, Lin Hai1, Liu Houyao2, et al. Application and Development of Vacuum Valve and Vacuum Control Equipment for High Vacuum Die Casting[J]. Special Casting & Nonferrous Alloys, 2011,31(3):222-225.
[1]万里,林海,刘后尧,陈国强,冯佳雄,吴湛方,杨林方,吴树森.真空压铸用真空阀及真空控制装置的开发[J].特种铸造及有色合金,2011,31(03):222-225+190-191. DOI：

Wan Li1, Lin Hai1, Liu Houyao2, et al. Application and Development of Vacuum Valve and Vacuum Control Equipment for High Vacuum Die Casting[J]. Special Casting & Nonferrous Alloys, 2011,31(3):222-225. DOI：

摘要

开发了具有自主知识产权的真空压铸的关键技术——真空阀及其控制系统。真空阀的工作原理是利用金属液的冲击力

通过杠杆驱动关闭排气通道。真空系统采用PLC和触摸屏控制

确保真空阀处于正常可靠的工作状态。真空压铸技术已在汽车底盘悬架、变速箱体、3G通讯腔体等关键零部件上获得了应用

效果良好。

Abstract

We have developed key techniques including vacuum valve and its control equipment for high vacuum die casting. The running principle of the vacuum valve is that exhausting channel is closed by a level arm driven by liquid pressure in the valve. Vacuum control apparatus uses PLC and touch screen technology to make sure reliable working state of valve. The vacuum die casting technology has been used for producing car chassis part

transmission box and 3G housing

and desirable effects are achieved.