航天器复杂薄壁镁合金铸件低压铸造工艺研究

何庆彪; 杜庆安; 李浈

压力铸造 | 浏览量 : 0 下载量: 379 CSCD: 7

导出
分享
收藏
专辑

航天器复杂薄壁镁合金铸件低压铸造工艺研究
Production of Complex Thin-walled Magnesium Alloy Components for Spacecraft by Low Pressure Casting
2010年30卷第11期页码：1033-1034
纸质出版日期： 2010 ，
DOI：

扫描看全文

[1]何庆彪,杜庆安,李浈.航天器复杂薄壁镁合金铸件低压铸造工艺研究[J].特种铸造及有色合金,2010,30(11):1033-1034+977.

Production of Complex Thin-walled Magnesium Alloy Components for Spacecraft by Low Pressure Casting[J]. Special Casting & Nonferrous Alloys, 2010,30(11):1033-1034.
[1]何庆彪,杜庆安,李浈.航天器复杂薄壁镁合金铸件低压铸造工艺研究[J].特种铸造及有色合金,2010,30(11):1033-1034+977. DOI：

Production of Complex Thin-walled Magnesium Alloy Components for Spacecraft by Low Pressure Casting[J]. Special Casting & Nonferrous Alloys, 2010,30(11):1033-1034. DOI：

摘要

分析了航天器复杂薄壁镁合金低压铸造的特点和容易出现的铸造缺陷以及这些缺陷的产生原因。提出综合重力铸造和低压浇注的优点

即铸件上部增设冒口

底部放置冷铁

金属液在压力作用下以底注的方式注入型腔

依靠冒口和低压金属液从上下两个方面对铸件进行补缩

采用片状直浇道控制金属液流量;适当降低升液、充型速度和压力

改善铸型排气能力

结果铸件尺寸精度高

内部质量优良。

Abstract

Characteristics of low pressure magnesium alloy components and casting defects often encountered in the components were described

and origination of casting defects and countermeasures were presented.Meanwhile

effects of processing parameters on properties of low pressure magnesium alloy components were analyzed.Advantages of low pressure casting in producing magnesium alloy were expounded too.