6063铝合金薄板件挤压铸造模具设计及试验

王家宣; 罗贻正; 李文杰; 方敏

压力铸造 | 浏览量 : 0 下载量: 167 CSCD: 2

导出
分享
收藏
专辑

6063铝合金薄板件挤压铸造模具设计及试验
Design of Mould for Squeezing Casting 6063 Aluminum Alloy Sheet and Its Experiment
2011年31卷第3期页码：237-239
纸质出版日期： 2011 ，
DOI：

扫描看全文

[1]王家宣,罗贻正,李文杰,方敏.6063铝合金薄板件挤压铸造模具设计及试验[J].特种铸造及有色合金,2011,31(03):237-239+192.

Wang Jiaxuan, Luo Yizheng, Li Wenjie, et al. Design of Mould for Squeezing Casting 6063 Aluminum Alloy Sheet and Its Experiment[J]. Special Casting & Nonferrous Alloys, 2011,31(3):237-239.
[1]王家宣,罗贻正,李文杰,方敏.6063铝合金薄板件挤压铸造模具设计及试验[J].特种铸造及有色合金,2011,31(03):237-239+192. DOI：

Wang Jiaxuan, Luo Yizheng, Li Wenjie, et al. Design of Mould for Squeezing Casting 6063 Aluminum Alloy Sheet and Its Experiment[J]. Special Casting & Nonferrous Alloys, 2011,31(3):237-239. DOI：

摘要

针对厚度为3～4mm的6063合金薄板件

采用一模两腔间接挤压铸造的成形工艺

其模具设计的关键在于如何使金属液能平稳充型。为此

采取了加大浇口面积、提高压射比压和模具预热温度等措施。结果表明

当模具预热温度为250～300℃

浇注温度为740℃

浇口面积选择适当的情况下

成形的挤压铸件基本达到设计要求。

Abstract

6063 aluminum alloy sheet with size in 3～4 mm was manufactured by indirectional squeezing casting with two-cavity in one-mold. A squeezing casting mould was designed to ensure the smooth filling of liquid metal in indirectional squeezing casting. Design of the mould was conducted.