可组态的差压铸造控制系统开发

赵旸; 曲嘉; 王力刚; 田洪超; 张虎

压力铸造 | 浏览量 : 0 下载量: 93 CSCD: 2

导出
分享
收藏
专辑

可组态的差压铸造控制系统开发
Design of a Configurable Control System for Differential Pressure Casting
2011年31卷第4期页码：343-345
纸质出版日期： 2011 ，
DOI：

扫描看全文

[1]赵旸,曲嘉,王力刚,田洪超,张虎.可组态的差压铸造控制系统开发[J].特种铸造及有色合金,2011,31(04):343-345+396-397.

Zhao Yang1, Qu Jia2, Wang Ligang1, et al. Design of a Configurable Control System for Differential Pressure Casting[J]. Special Casting & Nonferrous Alloys, 2011,31(4):343-345.
[1]赵旸,曲嘉,王力刚,田洪超,张虎.可组态的差压铸造控制系统开发[J].特种铸造及有色合金,2011,31(04):343-345+396-397. DOI：

Zhao Yang1, Qu Jia2, Wang Ligang1, et al. Design of a Configurable Control System for Differential Pressure Casting[J]. Special Casting & Nonferrous Alloys, 2011,31(4):343-345. DOI：

摘要

使用模块化方法设计了差压铸造压力自动控制系统软件。模块化设计使得系统结构整齐清晰

按照需要实现的各种功能

将整个软件划分为相对独立的模块

模块之间使用固定接口连接成为有机整体。独立的模块和固定的接口保证了软件的易读性与可扩展性

减少了开发和维护难度

并使计算机控制系统性能稳定

运行可靠

且更容易实现不同用户的各类特殊要求。在此软件基础上开发的差压铸造计算机控制系统

实现了对于差压铸造整个工艺流程的控制和监测

通过了联机测试

并得到了应用。

Abstract

A new pressure control system for differential pressure casting was developed by modular design.The modular design system

which is divided into relatively independent modules for meeting the reguirements of the various function to achieve

has a clear structure.Fixed joint was used to link modules.The software exhibits easy operation.Independent modules and fixed joint ensure accessibility and scalability

reducing the difficulty of development and post-maintenance

meanwhile

it makes the computer control system stable and a reliable operation

so it is easier to implement various types of special requirement of users.The differential-pressure casting control system based on the software can realize the control and monitoring of the full-process.The system passed the practical testing and was applied.