铸造工艺参数对ADC12铝合金支架压铸件缺陷的影响

历长云; 王有超; 许磊; 王狂飞; 周志杰

压力铸造 | 浏览量 : 0 下载量: 295 CSCD: 4

导出
分享
收藏
专辑

铸造工艺参数对ADC12铝合金支架压铸件缺陷的影响
Effects of Processing Parameters on Defects in Die Casting ADC12 Alloy Bracket
2010年30卷第12期页码：1120-1122
纸质出版日期： 2010 ，
DOI：

扫描看全文

[1]历长云,王有超,许磊,王狂飞,周志杰.铸造工艺参数对ADC12铝合金支架压铸件缺陷的影响[J].特种铸造及有色合金,2010,30(12):1120-1122+1074.

Li Changyun1, Wang Youchao1, Xu Lei2, et al. Effects of Processing Parameters on Defects in Die Casting ADC12 Alloy Bracket[J]. Special Casting & Nonferrous Alloys, 2010,30(12):1120-1122.
[1]历长云,王有超,许磊,王狂飞,周志杰.铸造工艺参数对ADC12铝合金支架压铸件缺陷的影响[J].特种铸造及有色合金,2010,30(12):1120-1122+1074. DOI：

Li Changyun1, Wang Youchao1, Xu Lei2, et al. Effects of Processing Parameters on Defects in Die Casting ADC12 Alloy Bracket[J]. Special Casting & Nonferrous Alloys, 2010,30(12):1120-1122. DOI：

摘要

以ADC12铝合金支架压铸件为研究对象

研究了慢压射速度、压射压力、浇注温度等铸造工艺参数对铸件气孔的影响

试验结果显示低的慢压射速度由于缓慢排气

有利于减少缺陷

但是当一级压射速度增加到95L/min时

反而有利于减少缺陷。此外

较低的浇注温度以及适当的压铸压力有利于减少铸件的气孔数量。

Abstract

Effects of processing parameters

such as slow shot speed

injection forces and pouring temperature

on porosities in die casting ADC12 aluminum alloy bracket were investigated. The results reveal that the lower first shot speed can decrease defects as a result of exhausting air slowly

meanwhile

when the first shot speed reaches 95L/min

defects can be decreased too. In addition

lower pouring temperature and proper injection pressure are beneficial for the decrease of porosities in the die casting bracket.