采用高真空技术消除压铸件气孔

潘修峰; 葛楠

压力铸造 | 浏览量 : 0 下载量: 160 CSCD: 2

导出
分享
收藏
专辑

采用高真空技术消除压铸件气孔
Elimination of Gas Hole in Die Casting Components by High Pressure Vacuum Method
2011年31卷第5期页码：434-435
纸质出版日期： 2011 ，
DOI：

扫描看全文

[1]潘修峰,葛楠.采用高真空技术消除压铸件气孔[J].特种铸造及有色合金,2011,31(05):434-435+388.

Pan Xiufeng, Ge Nan. Elimination of Gas Hole in Die Casting Components by High Pressure Vacuum Method[J]. Special Casting & Nonferrous Alloys, 2011,31(5):434-435.
[1]潘修峰,葛楠.采用高真空技术消除压铸件气孔[J].特种铸造及有色合金,2011,31(05):434-435+388. DOI：

Pan Xiufeng, Ge Nan. Elimination of Gas Hole in Die Casting Components by High Pressure Vacuum Method[J]. Special Casting & Nonferrous Alloys, 2011,31(5):434-435. DOI：

摘要

压铸件气孔是空气残留在铸件中形成的。普通的抽真空方法可以有效地排除模具型腔中的一部分空气

但达不到规定要求。采用高真空技术

在很短的时间内将型腔内的空气抽出;同时

通过冲头前进将型腔和空气隔离;在此条件下

将熔液高速推进型腔

直到铝合金凝固

实现铸件内完全不存留空气

从而解决了压铸件的气孔问题。

Abstract

Gas hole in the die castings was formed from residual gas in the castings.Although conventional vacuum method can effectively exhaust a part of gas in mould cavity

it can not meet technological requirements.Using high pressure vacuum method

gas in the mould cavity can be exhausted rapidly.Meanwhile

gas is isolated from the cavity by punch advance.And then

the liquid metal is driven by high velocity in cavity to solidification

realizing the total exhaustion and elimination of gas hole in the castings.