铜基体上等离子体喷涂钨涂层性能研究

种法力; 陈俊凌; 郑学斌

实用研究 | 浏览量 : 0 下载量: 321 CSCD: 8

导出
分享
收藏
专辑

铜基体上等离子体喷涂钨涂层性能研究
Properties of Plasma Sprayed Tungsten Coatings on Copper Substrate
2011年31卷第2期页码：110-112
纸质出版日期： 2011 ，
DOI：

扫描看全文

[1]种法力,陈俊凌,郑学斌.铜基体上等离子体喷涂钨涂层性能研究[J].特种铸造及有色合金,2011,31(02):110-112+200.

Zhong Fali1, Chen Junling2, Zheng Xuebin3. Properties of Plasma Sprayed Tungsten Coatings on Copper Substrate[J]. Special Casting & Nonferrous Alloys, 2011,31(2):110-112.
[1]种法力,陈俊凌,郑学斌.铜基体上等离子体喷涂钨涂层性能研究[J].特种铸造及有色合金,2011,31(02):110-112+200. DOI：

Zhong Fali1, Chen Junling2, Zheng Xuebin3. Properties of Plasma Sprayed Tungsten Coatings on Copper Substrate[J]. Special Casting & Nonferrous Alloys, 2011,31(2):110-112. DOI：

摘要

介绍了铜基体上等离子喷涂1mm钨涂层核聚变试验装置壁材料的制备

并对真空和大气等离子体喷涂钨涂层性能进行了比较研究

内容主要包括微观形貌、气孔率、杂质含量、结合强度和热负荷性能。结果表明

气孔率和氧杂质含量差异是大气和真空等离子体喷涂钨涂层热负荷性能差异的主要原因。

Abstract

Tungsten coating with 1 mm in thickness was prepared on the copper substrate by plasma spraying technology

which was used for nuclear fusion equipment

meanwhile

properties of plasma sprayed tungsten coatings at vacuum and at air were comparatively analyzed

such as microstructure

porosity

impurity content

bonding strength and heat flux performance.The results reveal that the difference of heat flux of coatings at vacuum and at air is mainly attributed to the difference of porosities and impurity content.