高能超声半固态复合法制备SiC<sub>p</sub>/ZL105复合材料

张燕瑰; 程和法; 黄笑梅; 吴进; 胡志君

复合材料 | 浏览量 : 0 下载量: 157 CSCD: 2

导出
分享
收藏
专辑

高能超声半固态复合法制备SiC_p/ZL105复合材料
Preparation of SiC_p/ZL105 Composites by High Intensity Ultrasonic Vibration under Semi-solid Temperature
2011年31卷第4期页码：363-366
纸质出版日期： 2011 ，
DOI：

扫描看全文

[1]张燕瑰,程和法,黄笑梅,吴进,胡志君.高能超声半固态复合法制备SiC_p/ZL105复合材料[J].特种铸造及有色合金,2011,31(04):363-366+398.

Zhang Yangui, Cheng Hefa, Huang Xiaomei, et al. Preparation of SiC_p/ZL105 Composites by High Intensity Ultrasonic Vibration under Semi-solid Temperature[J]. Special Casting & Nonferrous Alloys, 2011,31(4):363-366.
[1]张燕瑰,程和法,黄笑梅,吴进,胡志君.高能超声半固态复合法制备SiC_p/ZL105复合材料[J].特种铸造及有色合金,2011,31(04):363-366+398. DOI：

Zhang Yangui, Cheng Hefa, Huang Xiaomei, et al. Preparation of SiC_p/ZL105 Composites by High Intensity Ultrasonic Vibration under Semi-solid Temperature[J]. Special Casting & Nonferrous Alloys, 2011,31(4):363-366. DOI：

摘要

用渗流法制备高SiCp体积分数的预制块

再用超声波搅拌稀释的方法制备SiCp/ZL105复合材料

研究了超声波处理过程工艺参数对复合材料微观组织、性能的影响。结果表明

渗流法可以制备SiCp含量达55%～60%的预制块

采用超声波搅拌稀释预制块方法制备的SiCp/ZL105复合材料中SiCp含量为9%～23%

SiCp分散均匀

与基体结合良好;随着SiCp含量的增加

复合材料硬度提高

耐磨性能提高。

Abstract

SiCp/ZL105 composites were fabricated by ultrasonic vibration diluting high SiC volumetric fraction SiCp/ZL105 preforms which was prepared by pressure infiltration process.Effects of ultrasonic vibration processing parameters on microstructure and performance of the composites were investigated.The results reveal that SiC volumetric fraction can reach up to 55%～60% in pressure nitrated preforms

and SiC volumetric fraction in SiCp/ZL105 composites prepared by ultrasonic vibration diluting preforms can reach up to 9%～23%

in which uniformly dispersed SiC particle exhibits desirable bonding with the matrix.With increasing in SiC particles

hardness and wear resistance of the composites are obviously improved.

关键词

SiCp/ZL105复合材料加压渗流法高能超声波显微组织硬度耐磨性

Keywords

SiCp/ZL105 CompositesPressure Infiltrating ProcessHigh-intensity UltrasonicMicrostructureHardnessWear Resistance

references

文章被引用时，请邮件提醒。

提交

热处理对口腔用Ti-Zr-（M）多元合金的组织及耐磨性的影响

氩弧熔覆制备WC颗粒增强复合涂层及其组织性能研究

激光熔覆高耐磨无裂纹双层Fe基非晶复合涂层

Ni-Cu-P合金显微组织和硬度的研究

混杂增强AZ91镁合金基复合材料

高能超声半固态复合法制备SiCp/ZL105复合材料

Preparation of SiCp/ZL105 Composites by High Intensity Ultrasonic Vibration under Semi-solid Temperature

DOI：

摘要

Abstract

关键词

Keywords

references

高能超声半固态复合法制备SiC_p/ZL105复合材料

Preparation of SiC_p/ZL105 Composites by High Intensity Ultrasonic Vibration under Semi-solid Temperature