English Version
复合材料 | 浏览量 : 11 下载量: 108 CSCD: 2
  • 导出

  • 分享

  • 收藏

  • 专辑

    • Si对原位自生镁基复合材料摩擦磨损性能的影响

    • Effects of Si Content on Friction and Wear Performance of In-situ Mg2Si/AM60 Composites

    • 吴孝泉

      1
    • 2011年31卷第10期 页码:952-954   

      纸质出版日期: 2011

    扫 描 看 全 文

  • 引用

  • [1]吴孝泉.Si对原位自生镁基复合材料摩擦磨损性能的影响[J].特种铸造及有色合金,2011,31(10):952-954. DOI:
    Wu Xiaoquan. Effects of Si Content on Friction and Wear Performance of In-situ Mg2Si/AM60 Composites[J]. Special Casting & Nonferrous Alloys, 2011,31(10):952-954. DOI:
  •  
  •  
    论文导航

    摘要

    采用原位法制备Mg2Si/AM60复合材料,研究了不同质量分数的Si粉对Mg2Si/AM60复合材料摩擦磨损性能的影响。结果表明,Si质量分数增加,复合材料硬度增加,其磨损量随之减小,磨损性能得到显著加强。外加载荷增大,复合材料磨损量持续增加。与基体AM60相比,Mg2Si/AM60复合材料有效推迟微量磨损向严重磨损转变的时间。

    Abstract

    Effects of Si contents on friction and wear performance of in-situ Mg2Si/AM60 composites were investigated. It is found that,with increasing in Si content,the weight loss of the composites is decreased as a result of the increase of the hardness,greatly improving the wear behavior of the composites. With the loading increase,the weight loss of the composites is increased. Compared with AM60 matrix,the transformation time of trace-wear into severe wear of the composites is effectively postponed.

    关键词

    原位; 镁基复合材料; 摩擦磨损

    Keywords

    In-Situ; Magnesium Alloy; Friction and Wear

    文章被引用时,请邮件提醒。
    提交

    相关作者

    刘建秀 郑州轻工业大学机电工程学院
    樊江磊 郑州轻工业大学机电工程学院
    张驰 河南工业大学机电工程学院;河南机电职业学院轨道交通学院
    徐琴 河南工业大学机电工程学院
    李卫 暨南大学先进耐磨蚀及功能材料研究院; 暨南大学高性能金属耐磨材料技术国家地方联合工程研究中心
    刘洋赈 暨南大学先进耐磨蚀及功能材料研究院; 暨南大学高性能金属耐磨材料技术国家地方联合工程研究中心
    舒鑫 暨南大学先进耐磨蚀及功能材料研究院; 暨南大学高性能金属耐磨材料技术国家地方联合工程研究中心
    田君   福建工程学院材料科学与工程系  

    相关机构

    郑州轻工业大学机电工程学院
    河南机电职业学院轨道交通学院
    河南工业大学机电工程学院
    暨南大学高性能金属耐磨材料技术国家地方联合工程研究中心
    暨南大学先进耐磨蚀及功能材料研究院
    0