铝合金压铸件热矫形技术的开发与应用

黄志垣; 万里; 张百在; 陈亮; 池晓钦; 陈毅廷; 余亮; 徐飞跃

压力铸造 | 浏览量 : 0 下载量: 136 CSCD: 6

导出
分享
收藏
专辑

铝合金压铸件热矫形技术的开发与应用
Development and Application of Hot Rectification Technology in Al Alloy Die Castings
2011年31卷第8期页码：731-733
纸质出版日期： 2011 ，
DOI：

扫描看全文

[1]黄志垣,万里,张百在,陈亮,池晓钦,陈毅廷,余亮,徐飞跃.铝合金压铸件热矫形技术的开发与应用[J].特种铸造及有色合金,2011,31(08):731-733.

Huang Zhiyuan~1, Wan Li~2, Zhang Baizai~1, et al. Development and Application of Hot Rectification Technology in Al Alloy Die Castings[J]. Special Casting & Nonferrous Alloys, 2011,31(8):731-733.
[1]黄志垣,万里,张百在,陈亮,池晓钦,陈毅廷,余亮,徐飞跃.铝合金压铸件热矫形技术的开发与应用[J].特种铸造及有色合金,2011,31(08):731-733. DOI：

Huang Zhiyuan~1, Wan Li~2, Zhang Baizai~1, et al. Development and Application of Hot Rectification Technology in Al Alloy Die Castings[J]. Special Casting & Nonferrous Alloys, 2011,31(8):731-733. DOI：

摘要

零件变形是压铸生产中经常遇到且难以完全消除的主要缺陷之一

矫形是减轻零件变形量的有效手段。针对压铸生产中人工矫形方法存在效率低、工作量大、工作环境恶劣的缺点

开发了一种适于铝合金压铸件的热矫形技术。结果表明

在铸件出模后立即实行热矫形并辅助于水冷

可有效降低零件的变形量

产品100%满足机加工的要求。该方法具有效率高、工人劳动强度低、环境噪音低的优点

可取代人工矫形方法。

Abstract

Distortion is one kind of main defects occurred in the aluminum alloy die castings

which is difficult to fully be eliminated.Rectification is a key method to relieve the distortion of aluminum alloy die castings.A new hot rectification technology suitable for aluminum alloy die castings was developed to overcome the problems in low efficiency

high intensity and wicked environment in manual rectification condition.The distortion of the aluminum alloy parts can be effectively decreased by hot rectification combining with water cooling after ejection from the die

fully meeting the machining demand.The technology exhibits the advantages of high efficiency

low working intensity and low environmental noise.