摩擦对6061铝合金等径角挤压变形的影响

孙前江; 王高潮; 黄映霞

试验研究 | 浏览量 : 0 下载量: 202 CSCD: 3

导出
分享
收藏
专辑

摩擦对6061铝合金等径角挤压变形的影响
Effects of Friction on the Deformation of 6061 Aluminum Alloy during Equal-channel Angular Pressing（ECAP） Process
2011年31卷第5期页码：397-399
纸质出版日期： 2011 ，
DOI：

扫描看全文

[1]孙前江,王高潮,黄映霞.摩擦对6061铝合金等径角挤压变形的影响[J].特种铸造及有色合金,2011,31(05):397-399+385.

Sun Qianjiang, Wang Gaochao, Huang Yingxia. Effects of Friction on the Deformation of 6061 Aluminum Alloy during Equal-channel Angular Pressing（ECAP） Process[J]. Special Casting & Nonferrous Alloys, 2011,31(5):397-399.
[1]孙前江,王高潮,黄映霞.摩擦对6061铝合金等径角挤压变形的影响[J].特种铸造及有色合金,2011,31(05):397-399+385. DOI：

Sun Qianjiang, Wang Gaochao, Huang Yingxia. Effects of Friction on the Deformation of 6061 Aluminum Alloy during Equal-channel Angular Pressing（ECAP） Process[J]. Special Casting & Nonferrous Alloys, 2011,31(5):397-399. DOI：

摘要

应用Deform-3D软件

对6061铝合金的等径角挤压过程进行了数值模拟

研究了摩擦对挤压过程的影响

并分析了挤压过程中挤压力的变化以及应力和应变的分布情况。等径角挤压试验在1000kN压力机上进行

测定了实际挤压载荷

并采用不同的润滑剂对摩擦的影响进行了研究。结果表明

6061铝合金的等径角挤压变形过程中应力和应变呈不均匀分布

摩擦对挤压过程有着重要的影响。摩擦因数越大

挤压力越大

变形越不均匀。另外

对模拟结果进行了试验验证

结果基本一致。

Abstract

ECAP process of 6061 aluminum alloy was simulated by the Deform-3D software to understand effects of friction on ECAP process and to describe the change of squeezing force and distribution of strain and stress.ECAP process was conducted on 1000kN extruding machine

and effects of different lubricants on friction were observed by measuring practical extruding loading.The results show that strain and stress exhibit uneven distribution during ECAP process

and with increasing in frictional coefficient and extruding forces

uneven degree of deformation is increased.In addition

simulated results are well in agreement with experimental ones.