最新刊期
      卷 ， 期 2 ， 1996
      • Issue 2, (1996)
        摘要：Based on the experiments on the thermal analysis cup and the intellectualized instrument,a new thermal analysis technique has been studied out, which can test the modification efficency of Al-Si alloy on the shop floor.Further more,the mean solid growing acceleration E during euntectic nucleation and growth is carried out based on Newton heat transfer equilibrium equation, square root law and equilibrium diagram of Al-Si alloy. It can be used to assess the modification degree of Al-Si alloy. With the value of E small, the modification would be better.  
        关键词：Al-Si Alloy;Modification;Thermal Analysis   
        2
        |
        164
        |
        12
        <HTML>
        <Meta-XML>
        <引用本文> <批量引用> 46191474 false
        发布时间：2023-12-18
      • Issue 2, (1996)
        摘要：ＨａｓｔｅｌｌｏｙＣ－４型铸造镍基合金的组织及其腐蚀行为研究（下）大连理工大学秦紫瑞，吴晓光３·４点蚀行为试验合金的五一Ｉ点蚀极化曲线见图６。其自然电位Ｅｃｏｒｒ和点蚀击穿电位Ｅｂ值见表５。图６试验合金的点蚀Ｅ－Ｉ曲线表５试验合金的Ｅｃｏｒｒ和Ｅｂ值...  
          
        2
        |
        100
        |
        0
        <HTML>
        <Meta-XML>
        <引用本文> <批量引用> 46192219 false
        发布时间：2023-12-18
      • Issue 2, (1996)
        摘要：The factors effecting EPC include unbound sand and its filling, moulding box, pattern & cluster, vibration, vacuum, etc.. It is important to plan correctly the factors for stabilizing process and improving castings.  
        关键词：EPC;Moulding in Unbound Sand;Vibration;Vacuum;Pull   
        2
        |
        52
        |
        8
        <HTML>
        <Meta-XML>
        <引用本文> <批量引用> 46191324 false
        发布时间：2023-12-18
      • Issue 2, (1996)
        摘要：Heat plating process of a bimetal of ZA33-3 and steel and its interface characteristic are studied.The results show that two steels pre-streated in fluxing or passivating can be cated with ZA33-3 alloy. The new compounds appear on the interface metallurgically combined as the mutaul diffusion of Fe, Al, Zn and other atoms.  
        关键词：Fluxing;Passivating;Heat Plating;Interface Characteristic   
        2
        |
        31
        |
        0
        <HTML>
        <Meta-XML>
        <引用本文> <批量引用> 46191001 false
        发布时间：2023-12-18
      • Issue 2, (1996)
        摘要：In this paper an economic continuous melting-degassing furnace for Al alloy was studied with emphasis on its structural character and processing as well as the factors influencing on the quality of melt.The differences in operation between new and conventional furnaces were discussed in details.The melting condition in new furnace is favourable for reducing the oxidization of alloy and avoiding the hydrogen pickup, resulting in a small of amount of master alloy and modifier as well as improving quality of alloys. The electric expense is cut off 85% in comparison with conventional melting system.  
        关键词：Continuous Melting;Economic;Degassing;Aluminum Alloys   
        2
        |
        35
        |
        2
        <HTML>
        <Meta-XML>
        <引用本文> <批量引用> 46190107 false
        发布时间：2023-12-18
      • Fang Xusheng
        Issue 2, (1996)
        摘要：Let fluoride react with superheated aluminium, then add rare-earths to produce a new type of aluminium grain refiner──master alloy of Al-Ti-B-RE. This technology has such characteristics as stable product quality, high productive efficiency, low energy consumption and utilization of its by-product. The continuous casting and rolling method can be used to produce Al-Ti-B-RE refiner rod. It is also stated in this article that Al-Ti-B-RE is a new type of aluminium grain refiner which is different from Al-Ti-B. The grain refinement effect of Al-Ti-B-RE and the function of rare-earths are stated,too.  
          
        2
        |
        321
        |
        60
        <HTML>
        <Meta-XML>
        <引用本文> <批量引用> 46191099 false
        发布时间：2023-12-18
      • Wang Zitao,Liu Jingru
        Issue 2, (1996)
        摘要：Investigation and development of semicontinuous casting of squeeze Al ingotting are introduced in brief.The external trend and internal achievments about hot top casting and its advantages are emphasized.  
        关键词：Squeeze Al Ingotting;Semi Conticnuous Casting;Hot Top Casting   
        2
        |
        210
        |
        6
        <HTML>
        <Meta-XML>
        <引用本文> <批量引用> 46190884 false
        发布时间：2023-12-18
      • Issue 2, (1996)
        摘要：The principles and methods testing pattern material are summerized. Their characteristies, results and applicating fields are discussed. The codes of testing methods in China, U. S. A, UK,Japan and other countries are listed.  
        关键词：Investment Casting;Pattern Material;Testing Method   
        2
        |
        47
        |
        2
        <HTML>
        <Meta-XML>
        <引用本文> <批量引用> 46190151 false
        发布时间：2023-12-18
      • Issue 2, (1996)
        摘要：This paper summarized the present study status of the new hot working technology of metal materials in the 21th century──semi──solid casting techniques. It mainly reviewed the internal and external developing level about the production of the raw material──non──dendritic stucture alloys for semi-solid casting, the fundamental theory study of semi-solid casting and its industrial application.  
        关键词：Semi-solid Casting;Non-Dendritic Structure Alloy;Stir Casting;Rheological Behavior   
        2
        |
        297
        |
        91
        <HTML>
        <Meta-XML>
        <引用本文> <批量引用> 46191435 false
        发布时间：2023-12-18
      • Issue 2, (1996)
        摘要：The recent progress of shell moulding process at home and abroad are summerized. The main factors influencing the hot properties especially hot strength and hot toughness, and the methods controlling quality of pre-coated sand are also discussed.  
        关键词：Shall Molding Process;Pre-coated Sand;Hot Strength and Toughness   
        2
        |
        321
        |
        12
        <HTML>
        <Meta-XML>
        <引用本文> <批量引用> 46190071 false
        发布时间：2023-12-18
      • Issue 2, (1996)
        摘要：The method of control volume and straights fitting curve are used for computer simulation continuous casting process for roll cladding.In which the criterion of good roll cladding is given. The optimum seeking method are used for selecting main technique. The general design of continuous casting for roll cladding is got. Using the simulation can get the technique of good roll cladding, bleed-out etc.  
        关键词：Simulation;Roll Cladding;Continuous Casting   
        2
        |
        49
        |
        2
        <HTML>
        <Meta-XML>
        <引用本文> <批量引用> 46189915 false
        发布时间：2023-12-18
      • Issue 2, (1996)
        摘要：The colloidal silica-waterglass complex shell, coated with a colloidal silica-bonded zircon dressing, is used for producing stainless and high alloy steel castings. The surface roughness of them （about Ra 3. 2） are 1～1. 5 grade lower than one of waterglass shell.  
        关键词：Investment Casting;Complex Shell;Surface Quality   
        2
        |
        164
        |
        5
        <HTML>
        <Meta-XML>
        <引用本文> <批量引用> 46190589 false
        发布时间：2023-12-18
      • Issue 2, (1996)
        摘要：The hub,a important part of Changjiang 750 combination, is wholely produced using low pressure casting. Investigations are made on equipment, pattern, process and preventives of defects. Agood result is obtained adapting some improvements.  
        关键词：Notorbike;Hub;Low Pressure Casting   
        2
        |
        45
        |
        1
        <HTML>
        <Meta-XML>
        <引用本文> <批量引用> 46189831 false
        发布时间：2023-12-18
      • Issue 2, (1996)
        摘要：The slag of the low-molecular polyvinyl pattern materials is researched. An expectant reclamation is got through a series of experiments. The low-molecular polyvinyl pattern material without soaponification is shown.  
        关键词：Low-Molecular Polyvinyl Pattern Materical;Hydrocarbon Unit;Soaponification;Reclama tion   
        2
        |
        31
        |
        0
        <HTML>
        <Meta-XML>
        <引用本文> <批量引用> 46190671 false
        发布时间：2023-12-18
      • Chen Chanohui
        Issue 2, (1996)
        摘要：压铸件内部气（缩）孔的工艺控制华阳电工厂陈朝晖ＴｅｃｈｎｏｌｏｇｙＣｏｎｔｒｏｌｏｎＧａｓＨｏｌｅｏｒＳｈｒｉｎｋａｇｅＣａｖｉｔｙｏｆＤｉｅＣａｓｔｉｎｇｓ￥ＣｈｅｎＣｈａｎｏｈｕｉ(ＨｕａｙａｎｇＥｅｌｅｔｒｉｃａｌＡｐｐｌｉａｎｃｅｓＦａｃｔｏ...  
          
        2
        |
        26
        |
        2
        <HTML>
        <Meta-XML>
        <引用本文> <批量引用> 46190038 false
        发布时间：2023-12-18
      • Zhao Qiang
        Issue 2, (1996)
        摘要：采用真空压铸工艺提高整体车轮质量天津本田摩托有限公司赵强ＩｍｐｒｏｖｉｎｇＱｕａｌｉｔｙｏｆＷｈｏｌｅＷｈｅｅｌｗｉｔｈＶａｃｕｕｍＤｉｅＣａｓｔｉｎｇ￥ＺｈａｏＱｉａｎｇ（ＴｉｇｎｉｉＨＯＮＤＡＭｏｔｅｒｂｉｋｅ，Ｌｔｄ．）天津柳河压铸有限公司(简...  
          
        2
        |
        57
        |
        3
        <HTML>
        <Meta-XML>
        <引用本文> <批量引用> 46190968 false
        发布时间：2023-12-18
      • Issue 2, (1996)
        摘要：高新技术的结晶──Ｊ１１１６０型全自动卧式冷室压铸机阜新压铸机厂于学武，尹悦来，单明Ｊｌｌｌ６０ＡｕｔｏｍａｔｉｃＣｏｌｄＣａｖｅＨｏｒｉｚｏｎｔａｌＤｉｅＣａｓｔｉｎｇＭａｃｈｉｎｅ──ＡＣｒｙｓｔａｌｌｉｚａｔｉｏｎｏｆＨｉｇｈ－ＮｅｗＴｅｃｈｎ...  
          
        2
        |
        30
        |
        0
        <HTML>
        <Meta-XML>
        <引用本文> <批量引用> 46191396 false
        发布时间：2023-12-18
      • Issue 2, (1996)
        摘要：遥控熔铝油炉的研制湖北活塞厂解瑞店我厂为全国第九大铝活塞专业厂，年生产能力１５０万只活塞，年铝合金铸造能力达３０００～３５００ｔ。铝合金熔炼工艺设备有自制地坑柴油化铝炉和无芯工频熔化电阻保温。经查阅有关技术资料及结合出国考察收集的情报，“采用移植”技...  
          
        2
        |
        13
        |
        0
        <HTML>
        <Meta-XML>
        <引用本文> <批量引用> 46190716 false
        发布时间：2023-12-18
      • Issue 2, (1996)
        摘要：新型高效无公害精炼剂派罗特克公司安娜·亨利在精炼以下合金时，Ｐｙｒｏｔｅｋ向用户提供熔融金属，对环境无害的精炼剂产品：１．铝基合金；２．铜基合金；３．锌基合金。对于那些在各种铸造炉中尚未使用精炼剂来对熔融金属进行精炼、保护和除渣的熔铸工作者，我们提出...  
          
        2
        |
        109
        |
        0
        <HTML>
        <Meta-XML>
        <引用本文> <批量引用> 46191246 false
        发布时间：2023-12-18
      • Issue 2, (1996)
        摘要：压射实时控制系统—生产高质量压铸件的关键瑞士布勒有限公司压铸厂的客户期望每个压铸件都是高质量的，而满足这一期望的最好途径是拥有完全程序化控制的压铸机。布勒公司开发的具有两代经验的实时控制系统成功地在许多方面提高了压铸作业的质量水平。该机的压射曲线是可...  
          
        2
        |
        28
        |
        0
        <HTML>
        <Meta-XML>
        <引用本文> <批量引用> 46191272 false
        发布时间：2023-12-18
      • Issue 2, (1996)
        摘要：富来的成功之路──德国富来公司简介德国富来公司富来公司是当今世界上专门从事压铸工艺研究和成套设备生产的著名厂家。其产品在世界压铸领域具相当的拥有量，尤其是热室压铸机在欧、美地区垄断了七成市场。富来公司创建于１９４９年。１９５９年开始生产用于锌、锡和铅...  
          
        2
        |
        16
        |
        0
        <HTML>
        <Meta-XML>
        <引用本文> <批量引用> 46191186 false
        发布时间：2023-12-18
      0