Sand Casting Marine Tin Bronze Three-Way Plug Valve Body

Xia Jiulin; Yang Weiqin

doi:10.15980/j.tzzz.2022.10.022

Views : 0 下载量: 29 CSCD: 0

PDF
Export
Share
Collection
Album

Sand Casting Marine Tin Bronze Three-Way Plug Valve Body
Vol. 42, Issue 10, Pages: 1306-1308(2022)
Published： 2022 ，
DOI： 10.15980/j.tzzz.2022.10.022

扫描看全文

Xia Jiulin, Yang Weiqin. Sand Casting Marine Tin Bronze Three-Way Plug Valve Body. [J]. Special Casting & Nonferrous Alloys 42(10):1306-1308(2022)
DOI：

Xia Jiulin, Yang Weiqin. Sand Casting Marine Tin Bronze Three-Way Plug Valve Body. [J]. Special Casting & Nonferrous Alloys 42(10):1306-1308(2022) DOI： 10.15980/j.tzzz.2022.10.022.

摘要

通过对结构复杂、材质为锡青铜ZCuSn10Zn2的船用三通旋塞阀体的铸造过程进行研究，介绍了锡青铜的铸造特性，并讨论了三通旋塞阀体铸造工艺。结合两种法兰间不同夹角的三通旋塞阀体的结构特点，对阀体的砂型铸造工艺进行了研究。生产出品质优良的三通旋塞阀体铸件。在2.4 MPa压力下进行水压试验合格，有效地降低了阀体的泵漏率。

Abstract

The casting process of three-way cock valve body for marine with complex structure and made of tin bronze ZCuSn10 Zn2 was investigated. The casting characteristics of tin bronze were introduced

and the casting process of three-way cock valve body was discussed. Combined with the structural characteristics of three-way plug valve body with different angles between two flanges

the sand casting process of the valve body was improved to produce three-way cock valve body castings with high quality. The hydraulic test at 2.4 MPa is qualified

effectively reducing the pump leakage rate of the valve body.