Design of High Entropy Alloy Based on the Phase Structure

Views : 0 下载量: 170 CSCD: 0

PDF
Export
Share
Collection
Album

Design of High Entropy Alloy Based on the Phase Structure
Vol. 41, Issue 1, Pages: 37-42(2021)
Published： 2021 ，
DOI： 10.15980/j.tzzz.2021.01.007

扫描看全文

[1]张杨,艾云龙,陈卫华,杨启明,朱振滔.基于相结构的高熵合金设计[J].特种铸造及有色合金,2021,41(01):37-42.

Zhang Yang, Ai Yunlong, Chen Weihua, et al. Design of High Entropy Alloy Based on the Phase Structure. [J]. Special Casting & Nonferrous Alloys 41(1):37-42(2021)
[1]张杨,艾云龙,陈卫华,杨启明,朱振滔.基于相结构的高熵合金设计[J].特种铸造及有色合金,2021,41(01):37-42. DOI： 10.15980/j.tzzz.2021.01.007.

Zhang Yang, Ai Yunlong, Chen Weihua, et al. Design of High Entropy Alloy Based on the Phase Structure. [J]. Special Casting & Nonferrous Alloys 41(1):37-42(2021) DOI： 10.15980/j.tzzz.2021.01.007.

摘要

综述了各种相结构的高熵合金的理论及试验研究

以及围绕高熵合金的相形成规律

提出了各种相形成判据的内容及相关应用

以期为探索高熵合金的相形成规律提供思路。

Abstract

The theoretical and experimental research of high entropy alloys with various phase structures were reviewed

and the contents and applications of various phase formation criteria proposed on the phase formation rules of high entropy alloys were summarized

which was expected to provide ideas for establishing the phase formation rules of high entropy alloys.

关键词

高熵合金相结构相形成判据合金设计

Keywords

High Entropy AlloyPhase StructurePhase Formation CriterionAlloy Design

references

Alert me when the article has been cited

提交

相关文章

Composition and Characterization of CrCuFeMnSiAl_x High Entropy Alloys Prepared by Aluminothermic Reaction on Different Substrates

Microstructure and Properties of Laser Cladding Al_0.8CoCr_0.23FeNi_xW High Entropy Alloy Coating on H13 Steel

Microstructure and Properties of （NiAl）₆₃_-_xV₂₀Cr₁₇B_x Eutectic High-entropy Alloy

Structure and Propeties of Single-phase Si₁₉_.₈Ti₂₆_.₄Cr₁₀_.₁Mn₁₃_.₃Fe₁₈_.₆Ni₁₁_.₈ High Entropy Alloy

Design of Semi-solid Quasi-eutectic Al-Si Alloy and Billets Preparation

相关作者

Dong Peng 兰州理工大学材料科学与工程学院,有色金属先进加工与再利用省部共建国家重点实验室

La Peiqing 兰州理工大学材料科学与工程学院,有色金属先进加工与再利用省部共建国家重点实验室

Wang Xiaocui 兰州理工大学材料科学与工程学院,有色金属先进加工与再利用省部共建国家重点实验室

Ou Yujing 兰州理工大学材料科学与工程学院,有色金属先进加工与再利用省部共建国家重点实验室

Wei Yupeng 兰州理工大学材料科学与工程学院,有色金属先进加工与再利用省部共建国家重点实验室

Shan Hualiang 大连理工大学辽宁省凝固控制与数字化制备技术重点实验室

Tao Meiyue 大连理工大学辽宁省凝固控制与数字化制备技术重点实验室

Zhuang Wenchen 大连理工大学辽宁省凝固控制与数字化制备技术重点实验室

相关机构

State Key Laboratory of Advanced Processing and Recycling of Non-ferrous Metals,College of Materials Science and Engineering,Lanzhou University of Technology

Ningbo Institute of Dalian University of Technology

Key Laboratory of Solidification Control and Digital Preparation Technology （Liaoning Province）， Dalian University of Technology

Zhejiang Zhengxin Vehicle Testing Co.， Ltd.

College of Mechanical and Power Engineering， China Three Gorges University

⁰