Manufacture of Large Thin Wall Electronic Case Framework Based on Process Simulation and 3DP Sand Mold

Si Jinmei; Lü Sanlei; Li Jingjing; Xue Mengzhao

doi:10.15980/j.tzzz.2020.12.016

Views : 0 下载量: 61 CSCD: 0

Export
Share
Collection
Album

Manufacture of Large Thin Wall Electronic Case Framework Based on Process Simulation and 3DP Sand Mold
Vol. 40, Issue 12, Pages: 1384-1387(2020)
Published： 2020 ，
DOI： 10.15980/j.tzzz.2020.12.016

扫描看全文

[1]司金梅,吕三雷,李晶晶,薛孟照.基于工艺仿真和3DP砂型的大型薄壁电子机箱骨架制造[J].特种铸造及有色合金,2020,40(12):1384-1387.

Si Jinmei, Lü Sanlei, Li Jingjing, et al. Manufacture of Large Thin Wall Electronic Case Framework Based on Process Simulation and 3DP Sand Mold. [J]. Special Casting & Nonferrous Alloys 40(12):1384-1387(2020)
[1]司金梅,吕三雷,李晶晶,薛孟照.基于工艺仿真和3DP砂型的大型薄壁电子机箱骨架制造[J].特种铸造及有色合金,2020,40(12):1384-1387. DOI： 10.15980/j.tzzz.2020.12.016.

Si Jinmei, Lü Sanlei, Li Jingjing, et al. Manufacture of Large Thin Wall Electronic Case Framework Based on Process Simulation and 3DP Sand Mold. [J]. Special Casting & Nonferrous Alloys 40(12):1384-1387(2020) DOI： 10.15980/j.tzzz.2020.12.016.

摘要

针对薄壁电子机箱骨架铸件

设计了浇注系统

运用仿真软件对工艺进行仿真及优化

确定最优工艺。采用3D打印砂型铸造工艺完成了铸件的试制

铸件成形良好

最小壁厚达到2.5 mm

尺寸精度及内部品质满足品质。

Abstract

The gating system was designed for the thin-walled electronic case frame casting. The process was simulated and the optimal process was determined by the simulation software. The trial production of the casting was completed by 3 D printing sand mold casting process. The castings were well formed with the minimum wall thickness of 2.5 mm

of which the dimensional accuracy and internal quality could meet the requirements.