Effects of Different Welding Speeds on Microstructure and Mechanical Properties of GH3039/IC10 Electron Beam Welded Joints

Sun Wenjun; Wang Shanlin; Zhang Ziyang; Hong Min; Wu Ming; Chen Yuhua; Ke Liming

doi:10.15980/j.tzzz.2020.11.022

Views : 0 下载量: 42 CSCD: 0

Export
Share
Collection
Album

Effects of Different Welding Speeds on Microstructure and Mechanical Properties of GH3039/IC10 Electron Beam Welded Joints
Vol. 40, Issue 11, Pages: 1274-1279(2020)
Published： 2020 ，
DOI： 10.15980/j.tzzz.2020.11.022

扫描看全文

[1]孙文君,王善林,张子阳,洪敏,吴鸣,陈玉华,柯黎明.焊接速度对GH3039/IC10电子束焊接头组织和性能的影响[J].特种铸造及有色合金,2020,40(11):1274-1279.

Sun Wenjun, Wang Shanlin, Zhang Ziyang, et al. Effects of Different Welding Speeds on Microstructure and Mechanical Properties of GH3039/IC10 Electron Beam Welded Joints. [J]. Special Casting & Nonferrous Alloys 40(11):1274-1279(2020)
[1]孙文君,王善林,张子阳,洪敏,吴鸣,陈玉华,柯黎明.焊接速度对GH3039/IC10电子束焊接头组织和性能的影响[J].特种铸造及有色合金,2020,40(11):1274-1279. DOI： 10.15980/j.tzzz.2020.11.022.

Sun Wenjun, Wang Shanlin, Zhang Ziyang, et al. Effects of Different Welding Speeds on Microstructure and Mechanical Properties of GH3039/IC10 Electron Beam Welded Joints. [J]. Special Casting & Nonferrous Alloys 40(11):1274-1279(2020) DOI： 10.15980/j.tzzz.2020.11.022.

摘要

IC10单晶Ni

Al基高温合金和GH3039高温合金可以采用电子束焊接技术用于整体叶盘的制造。通过改变焊接速度研究焊接参数对GH3039/IC10电子束焊接头组织与力学性能的影响

为工程实际应用提供数据参考。

Abstract

IC10 single crystal Ni

Al-based superalloy and GH3039 superalloy can be used in the manufacture of integral leaf disc by electron beam welding. The effect of welding parameters on microstructure and mechanical properties of GH3039/IC10 electron beam welded joints was investigated by changing welding speed

which provided data references for practical application of the project.