Research Progress in Fabrication and Interfacial Enhancement of Carbon Fiber Reinforced Al-matrix Composites

Li Tingju; Liu Jiaming; Yang Xi; Zhang Yubo

doi:10.15980/j.tzzz.2020.11.001

Views : 0 下载量: 409 CSCD: 0

Export
Share
Collection
Album

Research Progress in Fabrication and Interfacial Enhancement of Carbon Fiber Reinforced Al-matrix Composites
Vol. 40, Issue 11, Pages: 1177-1181(2020)
Published： 2020 ，
DOI： 10.15980/j.tzzz.2020.11.001

扫描看全文

[1]李廷举,刘嘉鸣,杨茜,张宇博.碳纤维增强铝基复合材料制备及强化机制研究进展[J].特种铸造及有色合金,2020,40(11):1177-1181.

Li Tingju, Liu Jiaming, Yang Xi, et al. Research Progress in Fabrication and Interfacial Enhancement of Carbon Fiber Reinforced Al-matrix Composites. [J]. Special Casting & Nonferrous Alloys 40(11):1177-1181(2020)
[1]李廷举,刘嘉鸣,杨茜,张宇博.碳纤维增强铝基复合材料制备及强化机制研究进展[J].特种铸造及有色合金,2020,40(11):1177-1181. DOI： 10.15980/j.tzzz.2020.11.001.

Li Tingju, Liu Jiaming, Yang Xi, et al. Research Progress in Fabrication and Interfacial Enhancement of Carbon Fiber Reinforced Al-matrix Composites. [J]. Special Casting & Nonferrous Alloys 40(11):1177-1181(2020) DOI： 10.15980/j.tzzz.2020.11.001.

摘要

碳纤维增强铝基复合材料由于具有高的比强度、比模量、低热膨胀系数、良好的冲击韧度等优异性能而具有广阔的应用前景。针对铝熔体与碳纤维间润湿性较差的瓶颈问题

论述了碳纤维表面涂层工艺对其润湿性以及渗进行为的影响;总结了目前不同制备工艺的特点;分析了不同界面强化机制及其对复合材料界面失效行为及力学性能的影响。

Abstract

Carbon fiber reinforced Al-matrix composites have great potential in a wide range of applications due to their high specific strength

specific modulus

low coefficient of thermal expansion and good impact toughness.In view of the bottleneck problem of poor wettability between molten Al and carbon fiber

the effects of surface coating technology of carbon fiber on the wettability and infiltration behavior were discussed. The characteristics of various fabrication processes was summarized. Different interfacial enhancement mechanisms and their effects on the interfacial failure behavior and mechanical properties of the composites were analyzed.