Numerical Simulation and Process Design of Rotor Spider

Gu Tao; Zhang Shuaixin; Liu Huafeng; Wu Li; Li Zhonghui; Zhao Yuhong; Hou hua

doi:10.15980/j.tzzz.2020.06.011

Views : 0 下载量: 68 CSCD: 0

Export
Share
Collection
Album

Numerical Simulation and Process Design of Rotor Spider
Vol. 40, Issue 6, Pages: 629-632(2020)
Published： 2020 ，
DOI： 10.15980/j.tzzz.2020.06.011

扫描看全文

[1]顾涛,张帅鑫,刘化峰,武立,李中会,赵宇宏,侯华.转子支架铸造工艺设计与数值模拟[J].特种铸造及有色合金,2020,40(06):629-632.

Gu Tao, Zhang Shuaixin, Liu Huafeng, et al. Numerical Simulation and Process Design of Rotor Spider. [J]. Special Casting & Nonferrous Alloys 40(6):629-632(2020)
[1]顾涛,张帅鑫,刘化峰,武立,李中会,赵宇宏,侯华.转子支架铸造工艺设计与数值模拟[J].特种铸造及有色合金,2020,40(06):629-632. DOI： 10.15980/j.tzzz.2020.06.011.

Gu Tao, Zhang Shuaixin, Liu Huafeng, et al. Numerical Simulation and Process Design of Rotor Spider. [J]. Special Casting & Nonferrous Alloys 40(6):629-632(2020) DOI： 10.15980/j.tzzz.2020.06.011.

摘要

基于ProCAST软件模拟了转子低碳合金钢支架铸件的充型过程

分析了铸件可能出现夹渣原因

并提出浇注系统加过滤网、冒口与冷铁配合使用的工艺方案

并对改进方案进行了数值模拟分析。结果发现

浇注系统加过滤网可以吸附夹杂、平稳液流。冒口与冷铁配合使用可消除铸件缩孔、缩松缺陷。试生产表明

该工艺可获得品质良好

能满足使用要求的转子支架铸件。

Abstract

The casting process design of rotor spider was investigated.The filling process was simulated by using the ProCAST software.Based on the simulated results

the origination of slag inclusion was analyzed

then the gating system with filter and casting process design of chill and riser were proposed to improve the casting quality.Numerical simulation was used to analyze the filling process of the gating system with filter and the casting process of chill and riser design.The results reveal that the gating system with filter can absorb the inclusion and stabilize the liquid flow.The casting process design of chill and riser can improve the feeding effect and eliminate the shrinkage cavity and porosity defects.The production verification by using the optimized technology was carried out

and desirable quality of rotor spider could be obtained

which could meet the technical requirement.