Three Dimensional Numerical Simulation of Filling Process of Vertical Centrifugal Casting Based on SPH Method

Zhao Jingyu; Song Zhenliang; Yan Peiwen; Niu Xiaofeng; Huang Huagui

doi:10.15980/j.tzzz.2019.12.018

Views : 0 下载量: 105 CSCD: 0

Export
Share
Collection
Album

Three Dimensional Numerical Simulation of Filling Process of Vertical Centrifugal Casting Based on SPH Method
Vol. 39, Issue 12, Pages: 1341-1344(2019)
Published： 2019 ，
DOI： 10.15980/j.tzzz.2019.12.018

扫描看全文

[1]赵静雨,宋振亮,阎佩雯,牛晓峰,黄华贵.基于SPH法立式离心铸造充型过程三维数值模拟[J].特种铸造及有色合金,2019,39(12):1341-1344.

Zhao Jingyu, Song Zhenliang, Yan Peiwen, et al. Three Dimensional Numerical Simulation of Filling Process of Vertical Centrifugal Casting Based on SPH Method. [J]. Special Casting & Nonferrous Alloys 39(12):1341-1344(2019)
[1]赵静雨,宋振亮,阎佩雯,牛晓峰,黄华贵.基于SPH法立式离心铸造充型过程三维数值模拟[J].特种铸造及有色合金,2019,39(12):1341-1344. DOI： 10.15980/j.tzzz.2019.12.018.

Zhao Jingyu, Song Zhenliang, Yan Peiwen, et al. Three Dimensional Numerical Simulation of Filling Process of Vertical Centrifugal Casting Based on SPH Method. [J]. Special Casting & Nonferrous Alloys 39(12):1341-1344(2019) DOI： 10.15980/j.tzzz.2019.12.018.

摘要

采用光滑粒子流体动力学（Smoothed Particle Hydrodynamics

SPH）方法对立式离心铸造充型过程进行数值模拟研究

建立了基于SPH立式离心铸造充型过程的三维数学模型

并通过水力学算例验证了模型的正确性。运用建立的数学模型对实际铸件充型过程进行模拟

并与ProCAST模拟结果进行对比

进一步验证了所建立数学模型和开发程序的实用性。

Abstract

SPH（smoothed particle hydrodynamics） method was used to simulate the filling process of vertical centrifugal casting. The three-dimensional mathematical model based on SPH vertical centrifugal casting filling process was established and calculated by hydraulics. The feasibility of the model was verified by using the mathematical model established. The actual casting filling process was simulated and compared with the ProCAST simulation ones. The practicality of the mathematical model and development program established was further explained.