Development of Multi-cavity Mould of Small Bracket Based on ProCAST

Wang Lei; Li Shan

doi:10.15980/j.tzzz.2019.09.011

Views : 0 下载量: 54 CSCD: 0

Export
Share
Collection
Album

Development of Multi-cavity Mould of Small Bracket Based on ProCAST
Vol. 39, Issue 9, Pages: 967-969(2019)
Published： 2019 ，
DOI： 10.15980/j.tzzz.2019.09.011

扫描看全文

[1]王磊,李珊.基于ProCAST软件的小型支架一模多腔压铸模开发[J].特种铸造及有色合金,2019,39(09):967-969.

Wang Lei, Li Shan. Development of Multi-cavity Mould of Small Bracket Based on ProCAST. [J]. Special Casting & Nonferrous Alloys 39(9):967-969(2019)
[1]王磊,李珊.基于ProCAST软件的小型支架一模多腔压铸模开发[J].特种铸造及有色合金,2019,39(09):967-969. DOI： 10.15980/j.tzzz.2019.09.011.

Wang Lei, Li Shan. Development of Multi-cavity Mould of Small Bracket Based on ProCAST. [J]. Special Casting & Nonferrous Alloys 39(9):967-969(2019) DOI： 10.15980/j.tzzz.2019.09.011.

摘要

介绍了汽车发动机内小型支架的结构和压铸生产的主要难点。小型支架压铸一般采用一模多腔

运用ProCAST软件对一模多腔的小型支架的流动充型过程进行了数值模拟。根据模拟结果对设计浇注方案进行优化

实现了多腔的流动平衡。结果表明

采用数值模拟分析软件可以缩短一模多腔的模具开发周期。

Abstract

The product structure and the main difficulties of die casting production of small bracket in automobile engine were described.The multi-cavity mold is generally used in die-casting production of small bracket.The filling of multi-cavity mould was simulated by ProCAST

and the design scheme of feeding system was adjusted according to the simulated results.The multi-cavity flow equilibrium was realized.The results show that the numerical simulation and analysis software can play an important role in the design of with multi-cavity mould and reducing development period of mould.