Gas Entrainment Behavior of Aluminum Alloy in Low Pressure Die Casting Process Based on Flow-3D Software

Sun Jingying; Le Qichi; Zhao Xu; Huo Hongwei

doi:10.15980/j.tzzz.2019.07.011

Views : 0 下载量: 94 CSCD: 0

Export
Share
Collection
Album

Gas Entrainment Behavior of Aluminum Alloy in Low Pressure Die Casting Process Based on Flow-3D Software
Vol. 39, Issue 7, Pages: 739-741(2019)
Published： 2019 ，
DOI： 10.15980/j.tzzz.2019.07.011

扫描看全文

[1]孙晶莹,乐启炽,赵旭,霍宏伟.基于Flow-3D的铝合金铸件低压铸造卷气行为[J].特种铸造及有色合金,2019,39(07):739-741.

Sun Jingying, Le Qichi, Zhao Xu, et al. Gas Entrainment Behavior of Aluminum Alloy in Low Pressure Die Casting Process Based on Flow-3D Software. [J]. Special Casting & Nonferrous Alloys 39(7):739-741(2019)
[1]孙晶莹,乐启炽,赵旭,霍宏伟.基于Flow-3D的铝合金铸件低压铸造卷气行为[J].特种铸造及有色合金,2019,39(07):739-741. DOI： 10.15980/j.tzzz.2019.07.011.

Sun Jingying, Le Qichi, Zhao Xu, et al. Gas Entrainment Behavior of Aluminum Alloy in Low Pressure Die Casting Process Based on Flow-3D Software. [J]. Special Casting & Nonferrous Alloys 39(7):739-741(2019) DOI： 10.15980/j.tzzz.2019.07.011.

摘要

基于Flow-3D软件对3种不同结构的铸件低压铸造充型过程进行数值模拟

分析了增压速度和铸件结构对充型过程中卷气量的影响。基于模拟结果

分别选择卷气最严重和充型最平稳的两种结构模型

进行生产试制

并对其进行了拉伸测试

分析了卷气量对压铸件力学性能的影响。

Abstract

Flow-3 Dsoftware was carried out to simulate the filling process of casting parts with three type of structures in low pressure die casting（LPDC）process.The influence of the pressurization rate and structure of the castings on the volume of entrained air were investigated.Based on the simulated results

the models with big volume of entrained air and most smoothly filling process were selected and produced in the factory.Tensile samples were prepared and the relationship of the air entrainment and mechanical properties were analyzed.