In Situ Synthesis of Ti<sub>3</sub>SiC<sub>2p</sub>/Al Matrix Composite Coating Fabricated on Ti-6Al-4V Alloy

Li Wei; Zhou Wei; Zhao Yuguang

doi:10.15980/j.tzzz.2019.05.001

Views : 0 下载量: 115 CSCD: 1

Export
Share
Collection
Album

In Situ Synthesis of Ti₃SiC_2p/Al Matrix Composite Coating Fabricated on Ti-6Al-4V Alloy
Vol. 39, Issue 5, Pages: 465-468(2019)
Published： 2019 ，
DOI： 10.15980/j.tzzz.2019.05.001

扫描看全文

[1]李伟,周伟,赵宇光.钛合金表面原位内生Ti_3SiC_(2p)/Al基复合材料涂层制备[J].特种铸造及有色合金,2019,39(05):465-468.

Li Wei, Zhou Wei, Zhao Yuguang. In Situ Synthesis of Ti₃SiC_2p/Al Matrix Composite Coating Fabricated on Ti-6Al-4V Alloy. [J]. Special Casting & Nonferrous Alloys 39(5):465-468(2019)
[1]李伟,周伟,赵宇光.钛合金表面原位内生Ti_3SiC_(2p)/Al基复合材料涂层制备[J].特种铸造及有色合金,2019,39(05):465-468. DOI： 10.15980/j.tzzz.2019.05.001.

Li Wei, Zhou Wei, Zhao Yuguang. In Situ Synthesis of Ti₃SiC_2p/Al Matrix Composite Coating Fabricated on Ti-6Al-4V Alloy. [J]. Special Casting & Nonferrous Alloys 39(5):465-468(2019) DOI： 10.15980/j.tzzz.2019.05.001.

摘要

将一定配比的Al-Si-TiC粉末体系涂覆在Ti-6Al-4V合金表面

利用低氧压熔结技术制备了原位内生Ti

SiC

/Al复合材料涂层。结果表明

Al在合成Ti

SiC

过程中稀释各反应物反应浓度起到了类似的稀释剂作用

促进了反应相生成

起到了类似催化剂作用;降低了生成Ti

SiC

的反应起始温度

起到了类似辅助剂作用;消耗了加热环境中残存的氧

起到了类似除氧剂作用

促进了涂层致密化

起到了类似填充剂的作用;为合成Ti

SiC

提供了一种更加便捷的路径。

Abstract

A coating reinforced with in situ synthesis of Ti

SiC

particulates was fabricated successfully on the Ti-6 Al-4 Valloy by the low oxygen partial pressure fusing technique in the Al-Si-TiC powders system.The results show that the role of aluminum is served as a diluent agent to decrease the molar fraction of reactant in the slurry and as a activator agent to accelerates the coating formation

as a assistant agent to decrease the reactive temperature for the formation of Ti

SiC

as deoxidant agent to remove the oxygen in the system

as stuffing agent to favor the densification of coating during the fabrication of Ti

SiC

which provide an easier route for fabrication of the Ti

SiC

关键词

Ti-6Al-4V合金原位内生Ti3SiC2颗粒

Keywords

Ti-6Al-4V AlloyIn Situ SynthesisTi3SiC2 Particulate

references

Alert me when the article has been cited

提交

Fabrication of a TiC-TiB₂ Particulate Reinforced Metal Matrix Composite Coating Formed on Ti-6Al-4V Alloy Surface

Effects of Sintering Temperature on Microstructure of Vacuum Sintered Ti-6Al-4V by Compression Molding

In Situ Synthesis of Ti3SiC2p/Al Matrix Composite Coating Fabricated on Ti-6Al-4V Alloy

DOI： 10.15980/j.tzzz.2019.05.001

摘要

Abstract

关键词

Keywords

references

In Situ Synthesis of Ti₃SiC_2p/Al Matrix Composite Coating Fabricated on Ti-6Al-4V Alloy