Effects of Low Frequency Electroslag Remelting on Microstructure and Properties of NO8367 Austenitic Stainless Steel

Yu Kun; Yu Anshan; Yang Xiangjie

doi:10.15980/j.tzzz.2019.02.004

Views : 0 下载量: 74 CSCD: 1

Export
Share
Collection
Album

Effects of Low Frequency Electroslag Remelting on Microstructure and Properties of NO8367 Austenitic Stainless Steel
Vol. 39, Issue 2, Pages: 133-136(2019)
Published： 2019 ，
DOI： 10.15980/j.tzzz.2019.02.004

扫描看全文

[1]余坤,吁安山,杨湘杰.低频电渣重熔对NO8367奥氏体不锈钢组织性能的影响[J].特种铸造及有色合金,2019,39(02):133-136.

Yu Kun, Yu Anshan, Yang Xiangjie. Effects of Low Frequency Electroslag Remelting on Microstructure and Properties of NO8367 Austenitic Stainless Steel. [J]. Special Casting & Nonferrous Alloys 39(2):133-136(2019)
[1]余坤,吁安山,杨湘杰.低频电渣重熔对NO8367奥氏体不锈钢组织性能的影响[J].特种铸造及有色合金,2019,39(02):133-136. DOI： 10.15980/j.tzzz.2019.02.004.

Yu Kun, Yu Anshan, Yang Xiangjie. Effects of Low Frequency Electroslag Remelting on Microstructure and Properties of NO8367 Austenitic Stainless Steel. [J]. Special Casting & Nonferrous Alloys 39(2):133-136(2019) DOI： 10.15980/j.tzzz.2019.02.004.

摘要

研究了不同低频电渣重熔对NO8367奥氏体不锈钢电渣锭质量的影响。结果表明

在经过重熔之后的铸锭各方面性能都得到了显著提升

尤其是在7.5Hz频率下制备的试样

其夹杂物数量最少

力学性能最佳

断裂方式为呈韧窝断裂形式

表现出良好的塑性。

Abstract

The effects of electroslag remelting with different low frequencies on the quality of NO8367 austenitic stainless steel ingots were investigated.The results show that the properties of the ingots after remelting are significantly improved

especially in the samples prepared at 7.5 Hz

where the number of inclusions is the least

and the mechanical properties are desirable with tough fracture morphology.