Effect of Different Cast Process on Hot-rolling Quality of C19400 Alloy

Liu Yuemei; Yao Tingxin

doi:10.15980/j.tzzz.2018.12.028

Views : 0 下载量: 89 CSCD: 1

Export
Share
Collection
Album

Effect of Different Cast Process on Hot-rolling Quality of C19400 Alloy
Vol. 38, Issue 12, Pages: 1384-1386(2018)
Published： 2018 ，
DOI： 10.15980/j.tzzz.2018.12.028

扫描看全文

[1]刘月梅,姚廷鑫.铸造工艺对C19400铸锭热轧质量的影响[J].特种铸造及有色合金,2018,38(12):1384-1386.

Liu Yuemei, Yao Tingxin. Effect of Different Cast Process on Hot-rolling Quality of C19400 Alloy. [J]. Special Casting & Nonferrous Alloys 38(12):1384-1386(2018)
[1]刘月梅,姚廷鑫.铸造工艺对C19400铸锭热轧质量的影响[J].特种铸造及有色合金,2018,38(12):1384-1386. DOI： 10.15980/j.tzzz.2018.12.028.

Liu Yuemei, Yao Tingxin. Effect of Different Cast Process on Hot-rolling Quality of C19400 Alloy. [J]. Special Casting & Nonferrous Alloys 38(12):1384-1386(2018) DOI： 10.15980/j.tzzz.2018.12.028.

摘要

在生产中发现

不同铸造工艺条件下生产的C19400铸锭

在同一加热制度下热轧开坯

会出现截然不同的结果。针对不同铸造工艺下生产的铸锭进行各项指标检测

对检测结果进行对比

并结合理论分析

认为不同的铸造工艺造成铸锭高倍相组织、高温性能及应力有差异

直接影响了铸锭热轧质量。

Abstract

It is found that the C19400 ingots produced under different casting conditions have different results during hot rolling under the same heating system.The ingots produced by different casting processes were measured for various indexes

and the test results were compared.Combined with theoretical analysis

it is concluded that different casting processes result in metallographic phase

high-temperature performance and stress difference of the ingot

which directly affects the hot rolling quality.

关键词

C19400铸造工艺热轧

Keywords

C19400Cast ProcessHot-rolling

references

Alert me when the article has been cited

提交

Effects of Processing Techniques on Corrosion Resistant of Pb-free Brass

Properties of W70Cu30 Alloy Sheet Prepared by Hot-Rolling