Gating System Design and Filling Simulation of Aluminum Alloy Die Casting Dies based on Flow-3D Software

Han Xiongwei; Hu Xiangbo

doi:10.15980/j.tzzz.2018.10.012

Views : 0 下载量: 146 CSCD: 1

Export
Share
Collection
Album

Gating System Design and Filling Simulation of Aluminum Alloy Die Casting Dies based on Flow-3D Software
Vol. 38, Issue 10, Pages: 1085-1087(2018)
Published： 2018 ，
DOI： 10.15980/j.tzzz.2018.10.012

扫描看全文

[1]韩雄伟,胡享波.基于Flow-3D的铝合金缸盖浇注系统设计及充型模拟[J].特种铸造及有色合金,2018,38(10):1085-1087.

Han Xiongwei, Hu Xiangbo. Gating System Design and Filling Simulation of Aluminum Alloy Die Casting Dies based on Flow-3D Software. [J]. Special Casting & Nonferrous Alloys 38(10):1085-1087(2018)
[1]韩雄伟,胡享波.基于Flow-3D的铝合金缸盖浇注系统设计及充型模拟[J].特种铸造及有色合金,2018,38(10):1085-1087. DOI： 10.15980/j.tzzz.2018.10.012.

Han Xiongwei, Hu Xiangbo. Gating System Design and Filling Simulation of Aluminum Alloy Die Casting Dies based on Flow-3D Software. [J]. Special Casting & Nonferrous Alloys 38(10):1085-1087(2018) DOI： 10.15980/j.tzzz.2018.10.012.

摘要

以摩托车发动机缸体为例

研究其压铸模具浇注系统的设计。由于该类零件形状较复杂

壁厚不均

在压铸过程中很容易产生各种缺陷

特别是模具的浇注系统设计不当时

铸件容易产生卷气、气孔、冷隔等缺陷

从而严重影响铸件的力学性能。针对以上情况

对摩托车发动机缸体压铸模具进行浇注系统的设计

并利用FLOW-3D软件进行了充型模拟

基于模拟

优化了浇注方案

取得了良好的效果。

Abstract

The design of the gating system for the die casting die of motorcycle engine block was performed.Because of the complex shape and uneven wall thickness

it is easy to generate various defects in process of die casting.Especially when the design of the casting system of the die is not reasonable

airentrapment

gas hole

cold shut defects can be generated

which seriously affect the mechanical properties of the castings.In view of the above problems

the design of the gating system was optimized based on the Flow-3D simulation

obtaining the satisfied effects.