Manufacturing of Water Jacket Sand Cores for Truck Cylinder Head by SLS Method

Yu Lihua; Ye Dong

doi:10.15980/j.tzzz.2018.09.017

Views : 0 下载量: 105 CSCD: 1

Export
Share
Collection
Album

Manufacturing of Water Jacket Sand Cores for Truck Cylinder Head by SLS Method
Vol. 38, Issue 9, Pages: 988-990(2018)
Published： 2018 ，
DOI： 10.15980/j.tzzz.2018.09.017

扫描看全文

[1]余立华,业冬.利用SLS技术烧制发动机缸盖水套砂芯[J].特种铸造及有色合金,2018,38(09):988-990.

Yu Lihua, Ye Dong. Manufacturing of Water Jacket Sand Cores for Truck Cylinder Head by SLS Method. [J]. Special Casting & Nonferrous Alloys 38(9):988-990(2018)
[1]余立华,业冬.利用SLS技术烧制发动机缸盖水套砂芯[J].特种铸造及有色合金,2018,38(09):988-990. DOI： 10.15980/j.tzzz.2018.09.017.

Yu Lihua, Ye Dong. Manufacturing of Water Jacket Sand Cores for Truck Cylinder Head by SLS Method. [J]. Special Casting & Nonferrous Alloys 38(9):988-990(2018) DOI： 10.15980/j.tzzz.2018.09.017.

摘要

利用选择性激光烧结（SLS）技术烧制某重型发动机缸盖水套砂芯并对工艺过程进行了研究。该重型发动机缸盖水套砂芯内腔形状复杂

外形尺寸大

浇注温度高。通过选用70

40目宝珠砂

加入适当配比酚醛树脂的覆膜砂

采用合适的激光烧结工艺参数和后固化温度和时间

一次浇注成功合格的大型缸盖铸件。

Abstract

The process of using selective laser sintering（SLS）technology to burn the water jacket of a heavy engine cylinder was analyzed.Heavy engine cylinder head water jacket has a complex cavity shape

large size and high pouring temperature.By choosing 70

40 mesh ceramsites and the appropriate ratio of phenolic resin coated sand

with the appropriate laser sintering process parameters and the curing temperature as well as time

the large qualified cylinder head casting was produced sucessfully.

关键词

SLS覆膜砂水套砂芯

Keywords

SLSCoated SandsWater Jacket Sand Core

references

Alert me when the article has been cited

提交

Manufacturing Sand Core for Complex Hydraulic Valve Body by SLS（Selected Laser Sintering）