Design of Die Casting Die for the Metal Faucet Valve Body

Wang Yun; Ding Peng

doi:10.15980/j.tzzz.2018.09.010

Views : 0 下载量: 207 CSCD: 1

Export
Share
Collection
Album

Design of Die Casting Die for the Metal Faucet Valve Body
Vol. 38, Issue 9, Pages: 965-967(2018)
Published： 2018 ，
DOI： 10.15980/j.tzzz.2018.09.010

扫描看全文

[1]王赟,丁鹏.金属水龙头阀体压铸模设计[J].特种铸造及有色合金,2018,38(09):965-967.

Wang Yun, Ding Peng. Design of Die Casting Die for the Metal Faucet Valve Body. [J]. Special Casting & Nonferrous Alloys 38(9):965-967(2018)
[1]王赟,丁鹏.金属水龙头阀体压铸模设计[J].特种铸造及有色合金,2018,38(09):965-967. DOI： 10.15980/j.tzzz.2018.09.010.

Wang Yun, Ding Peng. Design of Die Casting Die for the Metal Faucet Valve Body. [J]. Special Casting & Nonferrous Alloys 38(9):965-967(2018) DOI： 10.15980/j.tzzz.2018.09.010.

摘要

以水龙头阀体铸件为研究对象

在分析铸件压铸工艺的基础上

结合选用的压铸设备

采用UG软件进行了压铸模具的设计。针对压铸件的复杂内部结构

模具中设计了斜导柱侧抽芯机构、自动脱螺纹机构以及齿轮齿条弧形抽芯机构。本模具设计可为弧形抽芯机构和侧向自动脱螺纹型芯机构的设计提供参考。

Abstract

Based on the analysis of die casting process and combined with the adopted die casting equipment

the die casting die for the faucet valve body was designed by UG software.In view of the complex internal structure of die casting product

the slant pillar guided side-core pulling mechanism

motordriven thread demoulding mechanism and gear-rack driven arched-core pulling mechanism were designed for the die.The die design can provide a reference for the design of arc core pulling mechanism and the lateral automatic threaded core demoulding mechanism.