Micro Pores of Pure Molybdenum Plates

Yang Kang; Xie Jingpei; Chen Yanfang; Wang Aiqin; Ma Douqin; Wang Wenyan

doi:10.15980/j.tzzz.2018.03.028

Views : 0 下载量: 43 CSCD: 0

Export
Share
Collection
Album

Micro Pores of Pure Molybdenum Plates
Vol. 38, Issue 3, Pages: 336-339(2018)
Published： 2018 ，
DOI： 10.15980/j.tzzz.2018.03.028

扫描看全文

[1]杨康,谢敬佩,陈艳芳,王爱琴,马窦琴,王文焱.纯Mo板材的微观孔洞研究[J].特种铸造及有色合金,2018,38(03):336-339.

Yang Kang, Xie Jingpei, Chen Yanfang, et al. Micro Pores of Pure Molybdenum Plates. [J]. Special Casting & Nonferrous Alloys 38(3):336-339(2018)
[1]杨康,谢敬佩,陈艳芳,王爱琴,马窦琴,王文焱.纯Mo板材的微观孔洞研究[J].特种铸造及有色合金,2018,38(03):336-339. DOI： 10.15980/j.tzzz.2018.03.028.

Yang Kang, Xie Jingpei, Chen Yanfang, et al. Micro Pores of Pure Molybdenum Plates. [J]. Special Casting & Nonferrous Alloys 38(3):336-339(2018) DOI： 10.15980/j.tzzz.2018.03.028.

摘要

通过SEM、XRD、TEM试验

研究了Mo粉制成的Mo板中出现麻点以及腐蚀后形成腐蚀坑等缺陷的原因。认为Mo粉和空气中氧含量对Mo板的质量有着极其重要的影响。

Abstract

The problems of pocking and etch pits after corrosion were investigated in the plate made of molybdenum powder.The SEM

XRD and TEM experiments were conducted by sampling from different molybdenum plate.The results show that the content of oxygen in molybdenum powder and oxygen in the air in process have the extremely important influence on the quality of molybdenum plate.

关键词

Mo粉纯Mo板材腐蚀坑

Keywords

Molybdenum PowderPure Molybdenum PlateCorrosion Pit

references

Alert me when the article has been cited

提交

暂无数据