Influence of Coating Layer on the Thermal Balance Temperature of ferrous Metal Liquid-forging Die

Liu Xiuzhong; Zhu Xingyuan; Wang Huajun; Peng Chunyu; Gui Qianfu; Hui Youke

doi:10.15980/j.tzzz.2018.03.013

Views : 0 下载量: 64 CSCD: 0

Export
Share
Collection
Album

Influence of Coating Layer on the Thermal Balance Temperature of ferrous Metal Liquid-forging Die
Vol. 38, Issue 3, Pages: 277-279(2018)
Published： 2018 ，
DOI： 10.15980/j.tzzz.2018.03.013

扫描看全文

[1]刘修忠,朱兴元,王华君,彭春宇,桂千富,惠有科.涂料覆层对黑色金属挤压铸造模具热平衡温度的影响[J].特种铸造及有色合金,2018,38(03):277-279.

Liu Xiuzhong, Zhu Xingyuan, Wang Huajun, et al. Influence of Coating Layer on the Thermal Balance Temperature of ferrous Metal Liquid-forging Die. [J]. Special Casting & Nonferrous Alloys 38(3):277-279(2018)
[1]刘修忠,朱兴元,王华君,彭春宇,桂千富,惠有科.涂料覆层对黑色金属挤压铸造模具热平衡温度的影响[J].特种铸造及有色合金,2018,38(03):277-279. DOI： 10.15980/j.tzzz.2018.03.013.

Liu Xiuzhong, Zhu Xingyuan, Wang Huajun, et al. Influence of Coating Layer on the Thermal Balance Temperature of ferrous Metal Liquid-forging Die. [J]. Special Casting & Nonferrous Alloys 38(3):277-279(2018) DOI： 10.15980/j.tzzz.2018.03.013.

摘要

为验证喷涂绝热材料对黑色金属挤压铸造模具热平衡温度的影响

采用ProCAST软件模拟了汽车变速器副箱锥环支板的挤压铸造成形过程

对绝热涂料模具的温度场进行分析。结果表明

涂料层可以有效抑制模具型腔温度的大幅波动

使模具型腔温度缓慢上升。涂料层降低模具工作温度作用有限

难以解决因黑色金属挤压铸造模具型腔过早失效问题。采用强制冷却的热管理方案可成为提高黑色金属挤压铸造模具寿命的新途径。

Abstract

To verify the effects of spraying heat insulating material on the peak temperature of ferrous metal liquid forging die

ProCAST software was used to simulate the liquid forging process of gearbox plate and analyze the temperature field of the die surface with spraying heat insulating material.The simulated results reveal that the coating layer can restrain effectively the temperature fluctuations of die cavity and take the temperature slowly rising.However

the ability of reducing the die maximum working temperature by spraying heat insulating material exhibits low

so it is difficult to solve the premature failure of liquid die

which is caused by high temperature of liquid metal.It is a potential way to improve the service life of ferrous metal squeezing die by the forced cooling technology.