New Mode of Rapid Sand Casting Based on 3D Technology

Yang Xin; Bian Yi; Sun Jianxin; Wu Zengchen; Liu Xinchao; Wang Mukong; Zhang Bo

doi:10.15980/j.tzzz.2017.11.019

Views : 0 下载量: 246 CSCD: 2

Export
Share
Collection
Album

New Mode of Rapid Sand Casting Based on 3D Technology
Vol. 37, Issue 11, Pages: 1229-1231(2017)
Published： 2017 ，
DOI： 10.15980/j.tzzz.2017.11.019

扫描看全文

[1]杨锌,边毅,孙建新,武增臣,刘新超,王目孔,张博.基于3D技术的快速砂型铸造新模式[J].特种铸造及有色合金,2017,37(11):1229-1231.

Yang Xin, Bian Yi, Sun Jianxin, et al. New Mode of Rapid Sand Casting Based on 3D Technology. [J]. Special Casting & Nonferrous Alloys 37(11):1229-1231(2017)
[1]杨锌,边毅,孙建新,武增臣,刘新超,王目孔,张博.基于3D技术的快速砂型铸造新模式[J].特种铸造及有色合金,2017,37(11):1229-1231. DOI： 10.15980/j.tzzz.2017.11.019.

Yang Xin, Bian Yi, Sun Jianxin, et al. New Mode of Rapid Sand Casting Based on 3D Technology. [J]. Special Casting & Nonferrous Alloys 37(11):1229-1231(2017) DOI： 10.15980/j.tzzz.2017.11.019.

摘要

归纳总结了一种基于3D技术的快速砂型铸造新模式

实现了铸造过程全流程的三维设计、制备与检验。与传统的铸造方法相比

有效缩短了研制周期

并且确保了铸件的尺寸精度和内部质量

可有效应用于单件、小批量铸件的研制与生产。

Abstract

A new mode of rapid sand casting based on 3D technology was presented

which could realize the 3 Ddesign

production and detection of whole casting process.Compared with those of conventional casting modes

the new mode can shorten effectively the production time and improve the dimension presicion and internal quality of the components.The mode can be applied for the production of single part and small production-volume production.