Effects of Aging Treatment on Microstructures and Properties of Aluminium Alloy Conductor Fabricated by Smelting-Casting

Zheng Zhenxing; Ding Xia; Wang Jinghui; Qi Longfei; Zhu Dezhi

doi:10.15980/j.tzzz.2017.08.006

Views : 0 下载量: 135 CSCD: 1

Export
Share
Collection
Album

Effects of Aging Treatment on Microstructures and Properties of Aluminium Alloy Conductor Fabricated by Smelting-Casting
Vol. 37, Issue 8, Pages: 831-833(2017)
Published： 2017 ，
DOI： 10.15980/j.tzzz.2017.08.006

扫描看全文

[1]郑振兴,丁霞,王景辉,戚龙飞,朱德智.时效工艺对熔铸制备的导电铝合金组织与性能的影响[J].特种铸造及有色合金,2017,37(08):831-833.

Zheng Zhenxing, Ding Xia, Wang Jinghui, et al. Effects of Aging Treatment on Microstructures and Properties of Aluminium Alloy Conductor Fabricated by Smelting-Casting. [J]. Special Casting & Nonferrous Alloys 37(8):831-833(2017)
[1]郑振兴,丁霞,王景辉,戚龙飞,朱德智.时效工艺对熔铸制备的导电铝合金组织与性能的影响[J].特种铸造及有色合金,2017,37(08):831-833. DOI： 10.15980/j.tzzz.2017.08.006.

Zheng Zhenxing, Ding Xia, Wang Jinghui, et al. Effects of Aging Treatment on Microstructures and Properties of Aluminium Alloy Conductor Fabricated by Smelting-Casting. [J]. Special Casting & Nonferrous Alloys 37(8):831-833(2017) DOI： 10.15980/j.tzzz.2017.08.006.

摘要

主要研究了时效处理工艺对熔铸工艺制备成形的6101铝合金的显微组织和性能的影响

采用金相观察（OM）、能谱分析（EDS）、拉伸测试、硬度测试以及电导率测试等手段

分析了时效温度及时间对合金的力学性能和导电性的影响。结果表明

在120

60℃时效时

随着时效温度增加

合金的屈服强度、硬度逐渐提高。当时效温度一定时

随着时效时间延长

合金的强度、硬度均呈上升趋势。对于6101铝合金

最优的时效处理工艺为140℃×8h。

Abstract

Effects of aging treatment on microstructures and properties of 6101 Al alloy were investigated by means of optical microscopy

EDS

tensile machine

hardness testing and electrical conductivity testing

especially for effects of aging temperature and aging time on the mechanical properties and electrical conductivity of 6101 Al alloy.The results reveal that the yield strength and hardness of aluminum alloy are increased with the increase of temperature at 120

60 ℃.At a given aging temperature

the strength and hardness of aluminum alloy are increased with the increase of aging time.The optimal aging treatment for 6101 Al alloy is at 140 ℃for 8h.