Numerical Simulation of Filling Powder Flow in the Powder Melallurgical Cross Part

Jiang Fan; Xiao Na; Yue Pengfei; Huang Chunman

doi:10.15980/j.tzzz.2016.11.005

Views : 0 下载量: 74 CSCD: 1

Export
Share
Collection
Album

Numerical Simulation of Filling Powder Flow in the Powder Melallurgical Cross Part
Vol. 36, Issue 11, Pages: 1139-1142(2016)
Published： 2016 ，
DOI： 10.15980/j.tzzz.2016.11.005

扫描看全文

[1]江帆,肖纳,岳鹏飞,黄春曼.粉末冶金“十”字形零件装粉流动数值模拟[J].特种铸造及有色合金,2016,36(11):1139-1142.

Jiang Fan, Xiao Na, Yue Pengfei, et al. Numerical Simulation of Filling Powder Flow in the Powder Melallurgical Cross Part. [J]. Special Casting & Nonferrous Alloys 36(11):1139-1142(2016)
[1]江帆,肖纳,岳鹏飞,黄春曼.粉末冶金“十”字形零件装粉流动数值模拟[J].特种铸造及有色合金,2016,36(11):1139-1142. DOI： 10.15980/j.tzzz.2016.11.005.

Jiang Fan, Xiao Na, Yue Pengfei, et al. Numerical Simulation of Filling Powder Flow in the Powder Melallurgical Cross Part. [J]. Special Casting & Nonferrous Alloys 36(11):1139-1142(2016) DOI： 10.15980/j.tzzz.2016.11.005.

摘要

运用EDEM软件对"十"字形零件在不同纵横尺寸（X、Y）下粉末填充行为进行了数值模拟。结果表明

随着横向尺寸（X向）增加

颗粒间压缩力是递减的。而在相同X值的情况下

十字形零件对应的部位的压力随着纵向尺寸（Y值）的减小而减小。通过比较分析

其横向尺寸对压力的影响比纵向尺寸影响大。

Abstract

EDEM software was employed to simulate filling behavior of metal powder for preparing the cross shaped parts with different dimensions（X and Y）.The simulated results show that the inside pressure is decreased gradually along the transverse direction of the cross shaped parts

and at the same Xvalue of the cross shaped parts

the pressure is decreased with the Y value decrease.With a comprehensive comparison

the influence of the lateral size is larger than that of longitudinal size.