Processing Optimization of Investment Casting Whole Stainless Steel Vortex Tube

Chen Kai; Wang Donghong; Liu Shumei; Li He; Li Fei

doi:10.15980/j.tzzz.2016.09.020

Views : 0 下载量: 135 CSCD: 2

Export
Share
Collection
Album

Processing Optimization of Investment Casting Whole Stainless Steel Vortex Tube
Vol. 36, Issue 9, Pages: 972-974(2016)
Published： 2016 ，
DOI： 10.15980/j.tzzz.2016.09.020

扫描看全文

[1]陈凯,汪东红,刘淑梅,李贺,李飞.整体精铸不锈钢涡管熔模铸造工艺优化[J].特种铸造及有色合金,2016,36(09):972-974.

Chen Kai, Wang Donghong, Liu Shumei, et al. Processing Optimization of Investment Casting Whole Stainless Steel Vortex Tube. [J]. Special Casting & Nonferrous Alloys 36(9):972-974(2016)
[1]陈凯,汪东红,刘淑梅,李贺,李飞.整体精铸不锈钢涡管熔模铸造工艺优化[J].特种铸造及有色合金,2016,36(09):972-974. DOI： 10.15980/j.tzzz.2016.09.020.

Chen Kai, Wang Donghong, Liu Shumei, et al. Processing Optimization of Investment Casting Whole Stainless Steel Vortex Tube. [J]. Special Casting & Nonferrous Alloys 36(9):972-974(2016) DOI： 10.15980/j.tzzz.2016.09.020.

摘要

医用不锈钢涡管结构复杂、壁厚不均

存在孤立热节

熔模铸造时存在局部缩松

影响铸件的正常使用

产品合格率低。借助ProCAST软件

在分析原有工艺方案的基础上

对浇注系统的结构进行了重新设计

新的浇注系统为铸件边缘部分提供金属补缩

解决了涡管铸件热节处的缩松缺陷

提高了产品的合格率。

Abstract

The medical stainless steel vortex tube has complex structure

uneven wall thickness and isolated spots

so shrinkage porosities always appear in the investment casting

which affects the normal use of the vortex tube.Also

the qualified rate of product is decreased.The pouring system was redesigned by using the ProCAST software after the analysis of initial system.The new pouring system successfully resolved the shrinkage defects in the vortex tube casting by providing metal feeding for the edge position of the castings

increasing the qualified rate of vortex tube.