An Anti-Oxidation Stainless Steel FeCrMoAlWCu

Feng Yu; Li Bin

doi:10.15980/j.tzzz.2016.07.003

Views : 0 下载量: 47 CSCD: 1

Export
Share
Collection
Album

An Anti-Oxidation Stainless Steel FeCrMoAlWCu
Vol. 36, Issue 7, Pages: 681-683(2016)
Published： 2016 ，
DOI： 10.15980/j.tzzz.2016.07.003

扫描看全文

[1]冯雨,李宾.FeCrMoAlWCu不锈钢的抗氧化性能研究[J].特种铸造及有色合金,2016,36(07):681-683.

Feng Yu, Li Bin. An Anti-Oxidation Stainless Steel FeCrMoAlWCu. [J]. Special Casting & Nonferrous Alloys 36(7):681-683(2016)
[1]冯雨,李宾.FeCrMoAlWCu不锈钢的抗氧化性能研究[J].特种铸造及有色合金,2016,36(07):681-683. DOI： 10.15980/j.tzzz.2016.07.003.

Feng Yu, Li Bin. An Anti-Oxidation Stainless Steel FeCrMoAlWCu. [J]. Special Casting & Nonferrous Alloys 36(7):681-683(2016) DOI： 10.15980/j.tzzz.2016.07.003.

摘要

研究开发了FeCrMoAlWCu不锈钢

与传统的Fe-Cr-Al-Mo耐热钢相比

Mo含量较高

Al含量较低。研究表明

其具有体心立方（BCC）结构

合金耐腐蚀性能良好

室温下在3.5%的NaCl溶液中的点蚀电位约为0.915 V

与00Cr26Ni6Mo4CuTi不锈钢相当。在1 100℃下的空气环境中具有良好的抗氧化性

经过100h的高温氧化试验

其单位面积质量增加约为0.428 4g/m

优于Cr

合金。

Abstract

A stainless steel FeCrMoAlWCu with the higher Mo contents and lower Al contents than the conventional Fe-Cr-Al-Mo steels was developed by evaluating its structural stability

corrosion resistance and oxidation resistance as well as mechanical properties.The results show that a stable BCC structure can be observed in the stainless steel.The steel exhibits the satisfied corrosion resistance in 3.5%NaCl solution

and the pitting corrosion potential is about 0.915 Vat 25 ℃

which is equivalent with that of 00Cr26Ni6Mo4 CuTi.The Fe65.6Cr23.6Mo5.3Al2.7W2Cu0.8steel exhibits excellent oxidation resistance in air at 1 100℃

and its weight increase per unit area is about 0.428 4g/m

after oxidized for100 h

which is superior to that of Cr

alloys.